Rep: 119
4
1
Please refer to the following manual for the screw I am referring to:
iPhone 4S, Headphone Jack Cable, Step 32
The screw head is stripped. Im looking for a way to get this thing out and replace it. Drilling and tapping is out I assume because its so dang small. Any help would be appreciated.
Thanks
Ist dies eine gute Frage?
Rep: 11,6 Tsd.
29
27
23
If you hold the back of the phone and push up while pressing down to loosen the screw. A small flat tip precision screwdriver typically works.
Superglue will work. I always prefer the Gel type.
I keep a bottle of ScrewGrab in the shop, you can find it on Amazon.
War diese Antwort hilfreich?
You guys rock. Thanks for the tips. Ill give them a shot.
You could try using super glue or a similar epoxy to bind it to your screwdriver, then replace the screw with a new one. I suggest something along the lines of JB Weld or Loctite. As it's a small area to work with I suggest applying the epoxy to the screwdriver first, not the screw to prevent overflow/spilling onto nearby components! Good luck!
War diese Antwort hilfreich?
Letzte 24 Stunden: 0
Letzte 7 Tage: 0
Letzte 30 Tage: 1
Insgesamt: 337
1 Kommentar
iPhone 4S Kopfhöreranschluss-Kabel ersetzen
von Mitch Rush