iMac Late 2006 won't power up

Question

iMac Intel 17"

1,83 GHz Core Duo oder 1,83, 2 oder 2,16 GHz Core 2 Duo A1208 (EMC 2104/2110/2114/2124)

201 Fragen Alle anzeigen

Shane @shane84188

Rep: 23

1

Veröffentlicht: 12. Jan 2013

Einstellungen

iMac Late 2006 won't power up

Installed SSD recently and everything worked for a week. This morning, I was unable to power on the machine. Disassembled the machine and peeled back the EMI cover. The first LED light came on as soon as connected to the power source and both fans jittered. When the power button is pressed, the second LED came on and stayed on. However, nothing happens. The third LED light never come on. Kept holding down the power button and the second LED went off. Any advice would be greatly appreciated.

Beantwortet! Antwort anzeigen Ich habe das gleiche Problem

Ist dies eine gute Frage?

Ja Nein

Bewertung 1

Einen Kommentar hinzufügen

2 Antworten

Gewählte Lösung

mayer @mayer

Rep: 685,3 Tsd.

MacHale Enterprises

3,4 Tsd.

1,1 Tsd.

2,6 Tsd.

Veröffentlicht: 12. Jan 2013

Einstellungen

Sounds like a bad power supply. Also examine the 24 capacitors for swelling and/or corrosion.

War diese Antwort hilfreich?

Ja Nein

Bewertung 1

3 Kommentare:

Thanks mayer. Will remove the power supply and look at it today. The fact that the first LED stays on solid when iMac is connected to the power source does not necessary indicate that the power supply is good?

13. Jan 2013 von Shane

Almost all the power supplies 20 to 1 have had the the first green light on. All that indicates is that there is trickle power getting to the unit.

13. Jan 2013 von mayer

Removed the power supply and examined it; noted 5 capacitors on the board. No swellings or corrosions were noted. Is there ways to test the PS to determine if it is good or bad?

14. Jan 2013 von Shane

Einen Kommentar hinzufügen

Thanks mayer. Will remove the power supply and look at it today. The fact that the first LED stays on solid when iMac is connected to the power source does not necessary indicate that the power supply is good? — Shane
Almost all the power supplies 20 to 1 have had the the first green light on. All that indicates is that there is trickle power getting to the unit. — mayer
Removed the power supply and examined it; noted 5 capacitors on the board. No swellings or corrosions were noted. Is there ways to test the PS to determine if it is good or bad? — Shane