Zum Hauptinhalt wechseln

Aufpolierte Version des iPhone 3GS mit schnelleren Verarbeitungsgeschwindigkeit. Die Reparatur geht ähnlich wie beim 3G vonstatten und braucht nur einfache Schraubendreher und Hebelwerkzeuge. Modell A1303 mit 16 oder 32 GB Kapazität mit schwarzer oder weißer Kunststoffrückseite.

1500 Fragen Alle anzeigen
Frage geschlossen

Why wont my iPhone charge, even after replacement?

My Iphone 3Gs wouldnt connect or charge to my charger but my sisters would so I knew it was my phone, I thought that my battery blew so I replaced it and everything turned on and worked but it still would not charge, I put it in restore mode and then put it on my ihome, it recongnized it and turned on but still no charge.

Diese Frage beantworten Ich habe das gleiche Problem

Ist dies eine gute Frage?

Bewertung 0
Einen Kommentar hinzufügen

1 Antwort

Hilfreichste Antwort

mrvalenzuela119, normally I would say to start with your dock connector. Check to make sure that the proper pins receive power. Check the pinout on here. If that looks okay, check the "fuses" on the logic board for continuity, it is possible that your charging fuses is shorted. After that it could be your PMIC or charging coil. All of those are of course board level repair and require some good skills, good tools and a lot of patience. Hope this helps, good luck.

Block Image

War diese Antwort hilfreich?

Bewertung 1
Einen Kommentar hinzufügen
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 0

Insgesamt: 264