BEANTWORTET: Cant see new HDD in startup disk but visible in Disk utility - MacBook

Cant see new HDD in startup disk but visible in Disk utility

I replaced a faulty HDD on a Macbook A1181 with a new WD 250 Sata II, i formatted the HDD with mac os journaled but this HDD is not visible for installation. When using the original installation CD I get error message The OS cannot be installed on the computer. I tried to place the hdd in external drive but still cant see the dive in startup utility or install the OS the drive but it still does show up in disk utility.

Beantwortet! Antwort anzeigen Ich habe das gleiche Problem

Ist dies eine gute Frage?

Ja Nein

Bewertung -1

Veröffentlicht: 30. Mär 2013

Einstellungen

Your drive may be to fast and need to be jumpered down. But I'm concerned about the error message. Can you give us the last three figures of your serial number. Also tell us about the installation disk you are using, what color is it and is there an number on it.

War diese Antwort hilfreich?

Ja Nein

Bewertung 1

3 Kommentare:

Thanks for your reply mayer. I finally tried it with 3 different drives all with the same result, another one was 5400 RPM SATA 2 and finally 5400 RPM SATA1- I had the same result with all drives. They are detected in Disk utility, I can format/ repair/ partition them etc but cant install OS on it. The CD I'm using I believe shipped with the laptop, its the grey Installation disk, serial number 2Z691-5975-A. I have also reset PRAM.

30. Mär 2013 von geo1600

The Macbook model is A1181.

30. Mär 2013 von geo1600

2Z691-5975-A.

Apple MacBook OS X Tiger 10.4.10 (Full Install) System Recovery DVD for Late 2006 and Early 2007 MacBooks

7. Nov 2013 von mayer

Einen Kommentar hinzufügen

MacBook

Cant see new HDD in startup disk but visible in Disk utility

1 Antwort

Antwort hinzufügen