Rep: 9
1
Hi, I have an Iphone 4S that has one certain area of the screen sometimes not responding to touch, the area is "4,5,6" on the keypad when trying to dial a number.
Does anyone have any solve around this?
Thanks,
Mykel
Ist dies eine gute Frage?
Rep: 5,5 Tsd.
20
17
12
Yes. You have a broken digitizer, so replace the display assembly.
War diese Antwort hilfreich?
i have repaired over 100 phones, just ran into a problem where a strip of the digitizer is not working. the problem occurs from Q to P on the keyboard in portrait mode. i have an iphone 4 assembeld with no screen and i use it to test screens. the screens i am using work fine with the test phone. upon inspection of the 4/s i see no problem areas. any suggestions? also i tried to hard reset/ and hard restore the phone with no success after updating.
Rep: 110
9
5
I had a similar problem with a 3gs. I tried a couple of spare screens but could not get rid of the dead spot. A narrow vertical area corresponding with the letter I when the keyboard is on screen. I put the main board under my microscope and found small traces of what looked like solder splashes on two of the pins in the digitizer socket.
War diese Antwort hilfreich?
i put a new digitezer on the phone and still some of the letters don't work in portrait mode , turn the phone in landscape all the keys work ...
War diese Antwort hilfreich?
Letzte 24 Stunden: 0
Letzte 7 Tage: 0
Letzte 30 Tage: 4
Insgesamt: 2,310
