Zum Hauptinhalt wechseln

Modell A1059 oder A1099 / 20, 40, oder 60 GB Festplatte/berührungsempfindliches Klickrad

227 Fragen Alle anzeigen

hard drive upgrade to newer type

i have an iPod 4th Generation or Photo and

i wanted to know if it was possible to use a new type of hard drive with the ipod and still have it work. i saw this toshiba one but am not sure if it needs to be the hard drive specifically made for that ipod in order to work.

http://www.geeks.com/details.asp?InvtId=...

Diese Frage beantworten Ich habe das gleiche Problem

Ist dies eine gute Frage?

Bewertung -1
Einen Kommentar hinzufügen

3 Antworten

Hilfreichste Antwort

brandon, , the drive you picked does notwork. The interface is wrong. Your model iPod uses a ATA-6 interface with pins, not a ZIF socket. I believe that a Toshiba MK8007GAH 80 GB would be a good choice for this iPod. Hope this helps, good luck.

War diese Antwort hilfreich?

Bewertung 3

3 Kommentare:

thanks for the help :D

von

Thank you for accepting my answer. Best of luck to you.

von

I've upgraded mine to a Toshiba model MK8007GAH that works great. Now I'm thinking of trying a Kingspec 120GB ssd http://www.amazon.com/128GB-KingSpec-1-8...

Update: I have installed the Kingspec 128GB 50-pin SSD into a 4G ipod and it works great so far.

von

Einen Kommentar hinzufügen

My 20gb 4th Gen iDie Hard Color, model A1099, lost his mind after I dropped it from 2+mtr high on a concrete floor. I ordered a:

64GB KingSpec 1.8-inch IDE CF 50-pin SSD Solid State Disk (MLC)

to replace the original KIA 20gb HDD. Within 24hrs I received the 64gb KingSpec SSD.

I used iFixit's "iPod 4th Generation or Photo Hard Drive Replacement" as my DIY guide.

A good thing to know is that the 64gb KingSpec SSD has the same size as the original 20gb HDD so you don't have to buy a 40/60gb thick rear panel, 40/60gb headphone jack or bracket. Connecting the KingSpec SSD is exactly the same as connecting a HDD

When I was done I attached the iMod to my Laptop. Right after that I got a "iPod Firewire AC Charger" logo on my iMod screen. When I attached it to the AC Charger the "iPod Firewire AC Charger" logo disappeared and the "battery is fully charged" logo appeared. Right after that I connected my iMod again to my laptop. Because iTunes recognized the iMod it started itself up. After I choose "Restore iPod" in iTunes my iMod was within one minute fully functional again. Time will tell if it became a "iDie Harder" ;-)

War diese Antwort hilfreich?

Bewertung 1
Einen Kommentar hinzufügen
Diese Antwort bezog sich ursprünglich auf eine andere Frage.

I recommend just buying one from iFixit.

http://www.ifixit.com/iPod-Parts/iPod-4t...

War diese Antwort hilfreich?

Bewertung 0
Einen Kommentar hinzufügen

Antwort hinzufügen

brandon wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 2

Insgesamt: 303