Dear Sirs,
I have the following problem with Linksys router wtr54gl: after an unsuccessful attempt to install new software, I have no communication with the Internet and can not reset the router to factory settings.
Expect some advice.
Credit: O. Boev
Ist dies eine gute Frage?
Rep: 116,3 Tsd.
66
68
359
You must connect to the router via Ethernet cable for setup/upgrade. If you pooched the upgrade buy a new router... software fixes/hacks are not really our thing here.
If this Answer is helpful please remember to return and mark it Accepted.
War diese Antwort hilfreich?
Rep: 479 Tsd.
35
329
970
Here's the Linksys support page for your unit WRT54GL Wireless-G Router It has all you should need to answer your questions.
War diese Antwort hilfreich?
Rep: 1,3 Tsd.
4
5
4
Try by resetting your router and re-configure it again. Please note that your all saved setting shall gone once you have done hard reset so i would suggest if your using ADSL then get your PPPoE account setting from your ISP first and then do this.
War diese Antwort hilfreich?
Letzte 24 Stunden: 0
Letzte 7 Tage: 0
Letzte 30 Tage: 2
Insgesamt: 509
1 Kommentar
Oghi Boev, when you say "attempt to install new software" are you referring to installing new firmware for your router? How did it fail? How did you try to do it?
von oldturkey03