Zum Hauptinhalt wechseln

GSM iPad 2 mit 16, 32 oder 64 GB Speicherkapazität und einem Dual Core Prozessor. Modellnummer A1396. Die Reparatur ist schwierig und verlangt Hitze und Hebeln.

151 Fragen Alle anzeigen

poor wifi signal after antenna replacement ipad 2

Hi,

I initially replaced my iPad 2 screen and snapped the wifi antenna upon disassembley.

I have recently bought another wifi antenna an fitted it properly. My ipad still wouldnt pick up signal unless I was literally a meter away.

I thought it was a faulty antenna so purchased another.. I have fitted another one and still I cant get a signal unless im a meter away from my router ?

This repair is for a customer so any help would be massively helpful to me :)

Thanks

Beantwortet! Antwort anzeigen Ich habe das gleiche Problem

Ist dies eine gute Frage?

Bewertung -1
1 Kommentar

Sorry I didnt mean to accept that.... Just check wifi module against pics online... Everything is perfect..

I bought these antennas off ebay ? Does it have to be a specific quality ? OEM Standard maybe ?

Has my IC chip gone ?

von

Einen Kommentar hinzufügen

6 Antworten

Gewählte Lösung

http://m.youtube.com/watch?v=26liR46z7qo

War diese Antwort hilfreich?

Bewertung 0

1 Kommentar:

Just double checked that. Its seated fine. I have a slight feeling i've knocked a little resistor on the wifi module :/ I am not 100% sure however

von

Einen Kommentar hinzufügen
Hilfreichste Antwort

Bildinhalt anzeigen:

Block Image

War diese Antwort hilfreich?

Bewertung 1
Einen Kommentar hinzufügen

Hi there did you take the motherboard off or take the sheild of the motherboard and unplug the Bluetooth module to plug in wifi antenna?

War diese Antwort hilfreich?

Bewertung 0

4 Kommentare:

Yes I took the mother board off clipped the clip onto the right antenna on the rear of the board and replace ?

Is that correct ?

von

Right ok there is a Easyier way to install the wifi with out taking motherboard out.

Just check the video it involves disconnecting a module from the board it would appear when u installed the anntena and took out motherboard you push down and uncliped the module u will understand when u look at video

von

No offence but just buy looking at pics how can you tell if it's connected or not?

I would unplug it and reconnect it

von

Here is what the part looks like the top arrow is the connector which is what I think has come loose and the bottom arrow is where the anntena plugs in..

If all is ok and still nothing then I could be a faulty part goodluck

von

Einen Kommentar hinzufügen

Any luck with this Nath? I recently replaced my antenna and have the same issue. I replaced it as in the video. Did you ever solve this? If so how?

War diese Antwort hilfreich?

Bewertung 0
Einen Kommentar hinzufügen

i have the same problem did any body solve the problem?

War diese Antwort hilfreich?

Bewertung 0

1 Kommentar:

Ive noticed that the replacement antennas can be faulty, Ive tried everything to improve the weak signals to no avail, after purchasing another replacement voila! Wifi works 100%. So now when I have to do a wifi antenna job I order two or three, just in case.

von

Einen Kommentar hinzufügen

please nobody have a sulotion ?

War diese Antwort hilfreich?

Bewertung 0
Einen Kommentar hinzufügen

Antwort hinzufügen

Nath Pelling wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 0

Insgesamt: 4,717