Motorola Droid 4 display doesn't rotate after touch screen replacement

Question

Smartphone

Anleitungen zur Reparatur und zum Zerlegen von Handys aller Hersteller und Service-Anbieter, inklusive Apple iPhone und Samsung Galaxy. Alles, was du brauchst, um dein Handy selbst zu reparieren.

73534 Fragen Alle anzeigen

Frage geschlossen

James Fiskum @jamesfiskum

Rep: 1

1

Veröffentlicht: 6. Okt 2014

Einstellungen

Motorola Droid 4 display doesn't rotate after touch screen replacement

Replaced the touch screen on Motorola Droid 4 slider phone and now the display is locked in the horizontal position. I checked and unchecked the Screen Rotation box in Settings but no success.....

Diese Frage beantworten Ich habe das gleiche Problem

Ist dies eine gute Frage?

Ja Nein

Bewertung 0

2 Kommentare:

I assumed that the new touch screen/frame assembly from another website would come complete, ready to install the LCD. WRONG! After going into the phone a second time and examining the old assembly vs. new, I found approximately 8 pieces that needed to be transferred to the new frame: 2 medal corner brackets, 4 black "slider stops" (2 on top/2on bottom edges of old frame attached w adhesive,) the black shines bezel plate opposite end of frame from the camera bracket, and MOST INMPORTANTLY... a small rectangular MAGNET along one edge again held in place with adhesive. Reassembled phone and works perfectly!

8. Okt 2014 von James Fiskum

In addition, ("shiney", not shines) there is also a white rubber pad that sits in the corner near the touch digitizer connector component. (I know THIS now....) hope this can help someone.

8. Okt 2014 von James Fiskum

Einen Kommentar hinzufügen

I assumed that the new touch screen/frame assembly from another website would come complete, ready to install the LCD. WRONG! After going into the phone a second time and examining the old assembly vs. new, I found approximately 8 pieces that needed to be transferred to the new frame: 2 medal corner brackets, 4 black "slider stops" (2 on top/2on bottom edges of old frame attached w adhesive,) the black shines bezel plate opposite end of frame from the camera bracket, and MOST INMPORTANTLY... a small rectangular MAGNET along one edge again held in place with adhesive. Reassembled phone and works perfectly! — James Fiskum
In addition, ("shiney", not shines) there is also a white rubber pad that sits in the corner near the touch digitizer connector component. (I know THIS now....) hope this can help someone. — James Fiskum