Einstellungen

Cannot boot to new SSD

I replaced my existing hard drive with a new Crucial MX100 256GB SSD. Had no problems installing the SSD and installed OS X Yosemite via usb key.

Problem I have is cannot boot to this SSD at all. I tried setting it as the startup disk but it doesn't appear in the list of disks.

But I checked with with Disk Utility and it's mounted. I ran a verify disk and no errors where found. I also erased it and set it to Mac OS Extended (Journaled).

But still cannot boot

Once I create a Gui partition table and reboot in recovery mode, I was able to install to my SSD.

Thanks for all the help :)

Beantwortet! Antwort anzeigen Ich habe das gleiche Problem

Ist dies eine gute Frage?

Ja Nein

Bewertung -1

1 Kommentar

Here's a screen shot of what I see in Disk Utility (sorry about the spotlight search bar)

http://i199.photobucket.com/albums/aa19/...

28. Okt 2014 von habs33

Einen Kommentar hinzufügen

Veröffentlicht: 27. Okt 2014

Einstellungen

Should be System Prefs->Startup Disk->Select Yosemite then tap Restart.

Alternately safe boot, or, boot to restore partition (R boot), choose Yosemite from there.

If this answer is acceptable please remember to return and mark it.

War diese Antwort hilfreich?

Ja Nein

Bewertung 1

2 Kommentare:

Thanks machead3, but I don't see my new SSD in the list of Startup Disks. I did create a Guid partition in Disk Utility. Here's a screen shot of what I see in Disk Utility (sorry about the spotlight search bar)

http://i199.photobucket.com/albums/aa19/...

28. Okt 2014 von habs33

You may have the SATA cable problem.

28. Okt 2014 von originalmachead

Einen Kommentar hinzufügen

MacBook Pro (13 Zoll, Anfang 2011, Unibody)

Cannot boot to new SSD

Update

1 Antwort

Antwort hinzufügen