Zum Hauptinhalt wechseln

Zweite iPhone Generation. Modell A1241 mit 8 oder 16 GB Kapazität und schwarzer oder weißer Kunststoff-Rückseite. Die Reparatur ist leichter zu bewerkstelligen als beim iPhone 1. Es werden Schraubendreher, Hebelwerkzeuge und Saugnäpfe benötigt.

1158 Fragen Alle anzeigen

Sleep button broken, still clicks

I have an iPhone 3G which (after too many drops floor) doesn't have a working sleep button.

The button still "clicks" so it seems like it is something else.

I did take the phone apart and put it together again with no luck.

Do anyone of you know what I could do and/or what parts to replace?

I did the mistake of upgrading to iOS 4 to jailbreak it (not sold in my country) but I'm not able to without getting into DFU mode, which needs a working sleep button, soo I have an expensive device which only displays the iTunes logo :s

Thanks,

Gunnar Steinn

Beantwortet! Antwort anzeigen Ich habe das gleiche Problem

Ist dies eine gute Frage?

Bewertung 1
Einen Kommentar hinzufügen

1 Antwort

Gewählte Lösung

I had the same problem with my 3G. What I ended up doing is buying a new headphone jack to replace the old one. The button that the power button knob presses against is attached to the headphone jack. I bought it for about $9 on eBay. The power button functioned again after installing the new headphone jack. The guide to do this is found on the ifixit website.

War diese Antwort hilfreich?

Bewertung 1

1 Kommentar:

Thanks, I'm going to try that!

In the meantime I was able to activate the phone with an AT&T sim so I can at least use it as an iPod.

von

Einen Kommentar hinzufügen

Antwort hinzufügen

Gunnar Steinn wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 0

Insgesamt: 3,416