Rep: 49
2
1
Does anyone know the value of the resistor (capacitor? I've seen it labeled as both but neither post had values) circled in the picture. Caught it with a fingernail and now the battery charging indicator won't update. I'm reasonably good at smd soldering - just need to order the right part!
Ist dies eine gute Frage?
Rep: 782,1 Tsd.
1,1 Tsd.
893
2,3 Tsd.
Aaron Teter, that is reference designator FL7500. It is a 240Ohm 0.2A filter (fixed inductor) in a 0201 package. Something like this will work.
War diese Antwort hilfreich?
Just wondering how you figure this information out. Your answers are always useful. Thanks for your help.
Can you please tell me if i can take this filter out from diffrent device.I have iphoen 5s,6 and ipad 3 monther board.If yes can you please guide me.
Rep: 30,6 Tsd.
25
71
41
You have a lot of exposed ground plane here. Cover that with a conformal coating before replacing your filter. Don't allow any solder to adhere to that ground and short your gas gauge line
War diese Antwort hilfreich?
Someone make jumper? Give some idea please.
Letzte 24 Stunden: 0
Letzte 7 Tage: 4
Letzte 30 Tage: 7
Insgesamt: 2,267
1 Kommentar
I have same problem with my old iPadmini, but I can not find a inductor 240ohm 0.2A, would you please advise the inductor can be replace by a SMD resistor 240ohm too?
von Sam Chang