Zum Hauptinhalt wechseln

Modell A1311 / Mitte 2011 / 2.5 & 2.7 GHz Core i5 oder 2.8 GHz Core i7 Prozessor

430 Fragen Alle anzeigen

Fans Noise, Error: 4SNS/1/C0000008:TS0P--124

Hi.

I Add A SSD, Using: "OWC Internal SSD DIY Kit For All Apple 21.5" iMac 2011 Models w/ Tools", Then My iMac is Very Noise.

Apple Hardware Test Said This Error.

TG Pro Said: ODD 4350 RPM, CPU 4000 RPM.

Please Help me.

Update (04/20/2015)

Thanks A Lot.

This is the result on Temperature Gauge Pro.

Block Image

Update (04/21/2015)

This is My new status:

Block Image

Update (04/21/2015)

This is my (last) new status. Thank you Mayer! And every one!

Block Image

Beantwortet! Antwort anzeigen Ich habe das gleiche Problem

Ist dies eine gute Frage?

Bewertung 1
Einen Kommentar hinzufügen

4 Antworten

Gewählte Lösung

I've had to replace the optical drive fan in several of these. Some of the fans can be fixed by simply pushing on the center of the fan to move it back in place.

War diese Antwort hilfreich?

Bewertung 5

3 Kommentare:

You said "Hi, i push on the fan and the silence return, thanks, very much. But: On TG Pro: "Fan Diagnostics: These fans appear to be not working properly: Optical Disk Drive (ODD)" What can Do?" First restart the machine and run the diagnostics again. It's Apple part # 922-9120 If you get the same failure use this guide: iMac Intel 21.5" EMC 2428 Lüfter des optischen Laufwerks austauschen

von

will this also work for the iMac Intel 27"

von

Luis, sure it will!

von

Einen Kommentar hinzufügen

JAIME, the problem is most likely related to the sensor of the optical drive fan. Replacing the sensor and/or the fan should resolve this. Try to start under Safe Boot mode. Follow this Apple TN" OS X: What is Safe Boot, Safe Mode?. Download and install this Temperature Gauge Pro. It should help show you what your sensors are telling you.

War diese Antwort hilfreich?

Bewertung 3

2 Kommentare:

Thanks A Lot. This is the result on Temperature Gauge Pro (below).

von

Boot my miMac on Safe mode and still is noisy.

von

Einen Kommentar hinzufügen

Follow what OT has above

Also did you also get this: OWC In-line Digital Thermal Sensor for iMac 2011 Hard Drive Upgrade. You'll need it if you are swapping the old HD for a SSD drive.

War diese Antwort hilfreich?

Bewertung 3

2 Kommentare:

Thanks Dan, On what disk i need put this sensor?: HDD (Old Original, WD 500 GB) or SSD (New, Recent Adding: Samsung 850 Pro 256GB).

von

On the hard drive.

von

Einen Kommentar hinzufügen

Boot my iMac on Safe mode and still is noisy.

Dan, on what disk i need put this sensor: HDD (Old Original, WD 500 GB) or SSD (New, Recent Adding: Samsung 850 Pro 256GB).?

Where can buy this fan or Sensor?

War diese Antwort hilfreich?

Bewertung 0

8 Kommentare:

It appears you have other issuers here.

von

Please tell me.

von

Did you open it and find which fan was making noise and push on the center of them to reseat it?

von

You only need the sensor I pointed you to if you swap out the HD for the SSD. Its a link so click on the blue to learn more about it.

von

Looking at your TG Pro output looks like the HD sensor is working so thats not the issue here. Are you sure you plugged in the sensors back (or correctly) when you disconnected the cables from the logic board to add in the 2nd drive cables?

von

3 weitere Kommentare anzeigen

Einen Kommentar hinzufügen

Antwort hinzufügen

JAIME wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 4

Letzte 30 Tage: 5

Insgesamt: 4,148