Not able to fully insert ribbon cable #3

Question

iPhone 3G

Zweite iPhone Generation. Modell A1241 mit 8 oder 16 GB Kapazität und schwarzer oder weißer Kunststoff-Rückseite. Die Reparatur ist leichter zu bewerkstelligen als beim iPhone 1. Es werden Schraubendreher, Hebelwerkzeuge und Saugnäpfe benötigt.

1158 Fragen Alle anzeigen

Gunnar Steinn @gunnarsteinn

Rep: 45

1

2

Veröffentlicht: 12. Jul 2010

Einstellungen

Not able to fully insert ribbon cable #3

I disassembled my iphone 3g to fix my power button but now the proximity sensor + speaker above the screen is not working.

I think the problem is in the ribbon cable #3. I've tried multiple times to insert it, I know it isn't supposed to go all the way in but when I insert it as far as I can and close the switch, I can still pull it out of the "dock" (without force).

With these symptoms, could the problem be something else than this connection?

How should I insert the cable?

regards,

gunnar steinn

After multiple tries of installing the cable over the past few days I went to a more experienced iphone repair guy and he replaced it in 5 minutes.

He told me that I had no idea why, but this cable seemed to break every once in a while when disassembling the phone.

So I finally have a working phone :)

thanks

Beantwortet! Antwort anzeigen Ich habe das gleiche Problem

Ist dies eine gute Frage?

Ja Nein

Bewertung 1

Einen Kommentar hinzufügen

8 Antworten

Gewählte Lösung

markus weiher @markusweiher

Rep: 35,1 Tsd.

140

71

53

Veröffentlicht: 12. Jul 2010

Einstellungen

hi gunnar,

you are not hte first one with this problem.

you're right, the cable should not go all the way in. the only orientation is the different color of the ribbon cable - the "shiny contacts" have to go all the way in - but if the connector is faulty - it won't hold anything.

the connector can be replaced. but you will need a pretty serious hardware for that - so if you don't have special soldering equipment and the knowledge how to use ths stuff - don't think about replacing the part.

i think there is the possibility to do something experimental with that connector, but i won't try anything with the 2 customer phones i have here at the moment ;-)

War diese Antwort hilfreich?

Ja Nein

Bewertung 3

Einen Kommentar hinzufügen

hectordtruong @hectordtruong Rep: 7,4 Tsd. 15 5 10 · Answer 1 · 2010-11-08T09:27:31-07:00

hectordtruong @hectordtruong

Rep: 7,4 Tsd.

15

5

10

Veröffentlicht: 8. Nov 2010

Einstellungen

Be careful when testing how well it is seated, by pulling it out of the connector you can damage the ribbon and/or the connector. If your connector needs replacement, let me know. I do these all the time.

War diese Antwort hilfreich?

Ja Nein

Bewertung 1

Einen Kommentar hinzufügen

jordanfreelove @jordanfreelove Rep: 1 · Answer 2 · 2011-02-23T19:39:24-07:00

jordanfreelove @jordanfreelove

Rep: 1

Veröffentlicht: 23. Feb 2011

Einstellungen

Hello, i just repaced my screen because it was broken and now everything on my phone is working except the earphone. where are you guys located? i am in Canada near Vancouver and i need a iphone repair guy.

thanks Jordan

War diese Antwort hilfreich?

Ja Nein

Bewertung 0

1 Kommentar:

hey guys thanks for responding. i took it to someone in my area and got it all fixed. the #3 cable wasnt put in properly but i just didnt want to open the phone again and risk wrecking something else.

thanks alot

take care

Jordan

25. Feb 2011 von jordanfreelove

Einen Kommentar hinzufügen

hectordtruong @hectordtruong Rep: 7,4 Tsd. 15 5 10 · Answer 3 · 2011-02-24T19:49:00-07:00

hectordtruong @hectordtruong

Rep: 7,4 Tsd.

15

5

10

Veröffentlicht: 24. Feb 2011

Einstellungen

Uh... I dont live in the Philippines. I live in California. Jordan, email me.

War diese Antwort hilfreich?

Ja Nein

Bewertung 0

2 Kommentare:

sorry... last time i looked at your site I thought you did.

25. Feb 2011 von pollytintop

No worries, I just thought it was funny and random at the same time :)

9. Mär 2011 von hectordtruong

Einen Kommentar hinzufügen

Troy @troy50488 Rep: 1 · Answer 4 · 2011-04-28T09:56:11-07:00

Troy @troy50488

Rep: 1

Veröffentlicht: 28. Apr 2011

Einstellungen

ive been given a Iphone 3 with the ribon broken off in the connector3 any ideas on how to remove this ribbon without breaking the connector, cant seem to find anything small enough to get in there!! any help will be greatful :)

War diese Antwort hilfreich?

Ja Nein

Bewertung 0

1 Kommentar:

you can just use your fingernail, you need to lift up from the edge closest to the power button (it's a hinged tab not a lift off tab so don't try to pull it off completely)

28. Apr 2011 von pollytintop

Einen Kommentar hinzufügen

Dick Gleason @dickgleason Rep: 1 · Answer 5 · 2011-12-06T12:51:58-07:00

Dick Gleason @dickgleason

Rep: 1

Veröffentlicht: 6. Dez 2011

Einstellungen

Taylor, You either edited or posted the answer below. I have an iphone 3GS that I replaced the battery on last night (or so I thought). I never actually got the phone working again. It will boot but I had no on-line signal from AT&T, plus a have a number of other problems, as follows:

1. Couldn't get an AT&T signal so I took the phone apart again. Cable 7 which think is the GSM antenna would not connect to the connection on the board

2. Cable 3 will not stay in the white connector, and I can't find the black clip (I think that that connector needs to be replaced now).

How might I get those parts fixed and the phone repaired?

Thanks,

Dick Gleason

Answered

Nov 8 2010

11:27 AM

Permalink • History

Be careful when testing how well it is seated, by pulling it out of the connector you can damage the ribbon and/or the connector. If your connector needs replacement, let me know. I do these all the time.

Edited by

Taylor Arnicar Feb 6 @ 10:45 PM

War diese Antwort hilfreich?

Ja Nein

Bewertung 0

3 Kommentare:

Dick, carefully observe if the #7 ribbon is actually connected or resting on top of the connector, you have to make sure it is in and secure, if not you may have the reception issues you've noticed.

As for the #3 connector, if you lost the latch, you may be able to reattach a new one, but everytime I try, it either ends up breaking or it doesnt stay on securely. I end up desoldering and replacing with a new one for the customer anyway. It was me that commented btw.

6. Dez 2011 von hectordtruong

Taylor,

I've made many phone calls to iphone repair shops and I can find no one willing to replace the white connector that holds cable #3. Also, no one is able or interested in repairing or replacing the on-board connection for cable #7. Can you do these repairs, and if so, how do I get the phone to you?

Thanks,

Dick Gleason

7. Dez 2011 von Dick Gleason

Dick, Taylor works for ifixit...they don't do repairs. You need to contact Hector Truong. Just click on his name under his comment and it should take you to his profile page..details on email are there. I'd recommend his work definitely, you can read his blog and others recommendations, he fixed a ruined #3 cable for me not so long ago- excellent job!

8. Dez 2011 von pollytintop

Einen Kommentar hinzufügen

Tamara Rohman @tamararohman Rep: 1 · Answer 6 · 2012-03-04T00:50:28-07:00

Tamara Rohman @tamararohman

Rep: 1

Veröffentlicht: 4. Mär 2012

Einstellungen

I just replaced the screen on my husbands iPhone 3GS and now the screen is white and will not do anything anyone know what I can do to fix it? Thank you

War diese Antwort hilfreich?

Ja Nein

Bewertung 0

1 Kommentar:

This usually happens if the phone is on and the screen is removed or installed. Try a hard reset to see if you can get it to go away. If it doesn't after a few tries, replace the LCD. Again, do it while the phone is OFF.

4. Mär 2012 von hectordtruong

Einen Kommentar hinzufügen