CDMA Version des iPhones der vierten Generation. Die Reparatur ist unkompliziert, aber Frontglas und LCD müssen gemeinsam ersetzt werden. Modell A1349 mit 16 oder 32 GB, CDMA Kompabilität.

424 Fragen Alle anzeigen

U-shaped piece of rubber from around earphone jack area

I was replacing the home button on my trusty iPhone4 Verizon and everything was going swimmingly until I got to the point of removing the corner screws of the display. The screw near the earphone jack loosened and fell under a nearby assembly. Not wishing to probe around with tweezers, I tipped the case over and the screw fell out along with a U-shaped piece of rubber (7.8mm long x 2.25mm wide x 1.4mm high, with a 0.75mm groove slightly off-center). I could find no obvious home for it, nor anything like it in the pictures. Anybody know where it goes?

Beantwortet! View the answer Ich habe das gleiche Problem

Ist dies eine gute Frage?

Punktzahl 0
Einen Kommentar hinzufügen

Kostenloser Versand für alle Bestellungen über 100 $ oder mit einem Pro Tech Toolkit!

Schau dich im Store um

1 Antwort

Gewählte Lösung

the black goes on top of the logic board on the part where it is sticking out. You don't need to put it back to make the phone works.

But if you want to put it back, it should look something like this.

http://www.imore.com/sites/imore.com/fil...

War diese Antwort hilfreich?

Punktzahl 1

Kommentare:

Thanks...I figured the channel had to fit over something. Guess it was loitering under the two cables until I tipped the errant screw out. Also tossed in a new battery & waiting for it to charge.

von

Einen Kommentar hinzufügen

Antwort hinzufügen

tcdeemer wird auf ewig dankbar sein.
Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 0

Insgesamt: 58