After changing batteries, the camera will not power up every time. When this happens I open the battery cover, close it and it works. Now it will not power up at all.
Ist dies eine gute Frage?
Rep: 448,9 Tsd.
11
366
1,4 Tsd.
Hi,
Check to see if the terminals in the battery cover and in the battery compartment are clean. Use a cotton bud (Q-tip?) very lightly moistened with some Isopropyl Alcohol to gently rub the terminals clean. Also ensure that there is a bit of "tension" in the cover terminals, i.e. that you feel that the terminals will be gently pushed back by the batteries when the cover is closed.
Here is a link from Ifixit guide on how to remove battery cover to make it easier Canon PowerShot A1000 IS Battery Cover Replacement
War diese Antwort hilfreich?
Thanks for the tip. I examined the contacts and saw they did not need cleaning. I installed the batteries and the camera powered on. Keeping my fingers crossed.
Letzte 24 Stunden: 0
Letzte 7 Tage: 0
Letzte 30 Tage: 0
Insgesamt: 207
