Why does the message 'raise the flash' appear on my screen?
Why does the message 'raise the flash' appear on my screen?
Ist dies eine gute Frage?
Bewertung
2
268536
3 Antworten
Gewählte Lösung
Rep: 448,1 Tsd.
11
366
1,4 Tsd.
Hi @Lm Duncan,
If you are using the Nikon ViewNX2 software to transfer your pictures, it states
At default settings, all new pictures on the camera memory card or in the camera’s built-in memory can be copied to the computer by clicking Start Transfer in Nikon Transfer 2. The pictures will automatically be displayed in ViewNX 2 when transfer is complete.
Here is an image taken from the software guide that shows, if you would rather, how to choose selected pictures to copy to your PC
Here is a link to the View NX2 reference guide.
War diese Antwort hilfreich?
Bewertung
1
Hilfreichste Antwort
Rep: 448,1 Tsd.
11
366
1,4 Tsd.
Hi,
Found this link which describes the message "raise the flash" . Scroll about half way down the page until you find "raise the flash"
http://manualmachine.com/nikon/coolpix-l...
The following is the cause/solution offered to this condition The numbers in brackets below refer to the page numbers in the manual. I have provided links to those pages.
The flash is lowered.
Raise the flash when shooting using Night portrait (p39),or Backlighting in scene mode. (p42)
http://manualmachine.com/nikon/coolpix-l...
When using G(easy auto) mode, you can take pictures without raising the flash but the flash does not fire.(p53)
War diese Antwort hilfreich?
Bewertung
2
how do itransfer new photos onto computer?
War diese Antwort hilfreich?
Bewertung
0
1 Kommentar
game agar igebs fotoebs da risi bralia xom ar icit?????
von natia