Zum Hauptinhalt wechseln

Das Apple iPhone 5c wurde am 10. September 2013 angekündigt. Ausgerüstet mit Schraubenziehern und Hebelwerkzeugen, geht die Reparatur ähnlich vonstatten wie bei den Vorgängermodellen. Verfügbar mit GSM oder CDMA mit 8, 16 oder 32 GB in weiß, pink, gelb, blau und grün.

1562 Fragen Alle anzeigen

iPhone constantly restarts after charging port replacement

Bought a phone off eBay, I powered it with my battery on my iPhone 5c (as it didn't have a battery) I then purchased a battery for it, battery works fine (powers my working phone) so I tried to charge it and didn't work, so I replacement the charging port. Now the phone just keeps restarting. The battery is fine, and I have reaplced charging ports before and not had this issue

Beantwortet! View the answer Ich habe das gleiche Problem

Ist dies eine gute Frage?

Bewertung 0
Einen Kommentar hinzufügen

Android Fix Kits

Ein neues Display oder Akku sind nur ein Kit entfernt.

Jetzt kaufen

Android Fix Kits

Ein neues Display oder Akku sind nur ein Kit entfernt.

Jetzt kaufen

1 Antwort

Gewählte Lösung

There's a group of 5 or 6 capacitors (possibly more depending on which board you have) between the battery socket on the board and shield covering the components, check to see if any have been knocked off or loose because that is one of many reasons that will cause the behavior described....I suggest this only because you mention a battery and charge port swap and it is a common accident when doing those repairs.

War diese Antwort hilfreich?

Bewertung 1

Kommentare:

I have 3 iPhone 5cs, one is perfect condition, the other 2 are both acting in the same way as described above. One of them has all capacitors in tact. The other has one missing, what is the repair for this? Also, any other ideas for the other phone with the full amount of capacitors ?

by

You will need the exact board number as there are two iPhone 5C boards (820-3581 or 820-3329) to acquire the schematic/component views so you can identify the ONE component in that group that is a filter NOT a capacitor. I usually pull components from dead boards to fix working ones.

As for the one with all caps intact I'd go for the U2 charging IC...that's usually the culprit when you have this behavior.

by

Einen Kommentar hinzufügen

Antwort hinzufügen

James McQuillan wird auf ewig dankbar sein.
Statistik anzeigen:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 7

Insgesamt: 166