Need help to fix Xbox 360 Controller analog high sensitivity

Question

Xbox 360 Wireless Controller

Drahtloser Kontroller für die Xbox 360

90 Fragen Alle anzeigen

Frage geschlossen

Rohan Lukhoo @r0han

Rep: 59

3

2

Veröffentlicht: 24. Apr 2016

Einstellungen

Need help to fix Xbox 360 Controller analog high sensitivity

I have an original wired Xbox 360 controller for windows which is broken. So, I've bought a wireless controller + a wireless receiver for windows. The analog sensitivity of the wireless controller is very high whereas the original wired i that have, the sensitivity is perfect. I will not repair the wired controller because the cables have been detached from the board. Thats why i want to use the wireless controller now.

So, i wanted take out the analog sensor(joystick module) of the original wired controller and put it in the wireless controller to fix the high sensitivity.

Will it be really fixed ? Because its impossible to play with these high sensitivity.

And Sorry if my English is poor.

Beantwortet! Antwort anzeigen Ich habe das gleiche Problem

Ist dies eine gute Frage?

Ja Nein

Bewertung 0

Einen Kommentar hinzufügen

1 Antwort

Gewählte Lösung

Tom Chai @tomchai

Rep: 73,8 Tsd.

19

111

82

Veröffentlicht: 24. Apr 2016

Einstellungen

The problem is that the joystick module is worn out. Just replace the worn out one with a new one from ebay and that's it.

Do not take the joystick module from a working controller, why would you break a working one?

War diese Antwort hilfreich?

Ja Nein

Bewertung 2

2 Kommentare:

Hello , I didn't fully understand your point. Because my english is poor. I wanted to says that i will use to joystick module of the original wired controller instead of buying new one and put it in the wireless controller to fix the high sensitivity. Will it be possible ? or if i do this the sensitivity will remain the same ? I'm very confused and want to make sure i don't do something wrong in this process.

25. Apr 2016 von Rohan Lukhoo

You will almost certainly destroy the working module if you take it from the board, so just buy a new module an install it onto the board.

25. Apr 2016 von Tom Chai

Einen Kommentar hinzufügen

Hello , I didn't fully understand your point. Because my english is poor. I wanted to says that i will use to joystick module of the original wired controller instead of buying new one and put it in the wireless controller to fix the high sensitivity. Will it be possible ? or if i do this the sensitivity will remain the same ? I'm very confused and want to make sure i don't do something wrong in this process. — Rohan Lukhoo
You will almost certainly destroy the working module if you take it from the board, so just buy a new module an install it onto the board. — Tom Chai