Zum Hauptinhalt wechseln

Das iPhone 6 Plus mit dem 5,5 Zoll Display ist die größere Version des iPhone 6 und seit dem 19. September 2014 auf dem Markt.

1525 Fragen Alle anzeigen

LCD screen is blank on 6 Plus

I've replaced a lot of iPhone screens and just replaced an iPhone 6 Plus screen. After resetting it everything worked properly so I screwed down the bracket. When I went to close the screen I noticed it was blank. I hooked it up to the computer and the touch screen is responsive, just not the LCD. What could be my issue? I've tried two other screens and neither of them will work either.

Diese Frage beantworten Ich habe das gleiche Problem

Ist dies eine gute Frage?

Bewertung 1
2 Kommentare

Is there an image , but no backlight? The image would obviously be very faint with a flashlight against it. And of course you would know which screws go where.

von

Nope, no image.

von

Einen Kommentar hinzufügen

4 Antworten

Hilfreichste Antwort

Here is a guide for you: Why iPhone Won't Turn on after Screen Replacement

War diese Antwort hilfreich?

Bewertung 1
Einen Kommentar hinzufügen

I fixed it. I unplugged the battery and cleaned the connectors with 99% isopropyl alcohol, dried, and gently reconnected it all. Everything works now :)

Edit: I got up this morning and tried it out and now it won't work again :(

War diese Antwort hilfreich?

Bewertung 1
Einen Kommentar hinzufügen

I think it's time to send it to a microsoldering professional. It isn't the backlight filters, because then it would have some kind of image with a light shining on the screen just right. I would guess that it has something to do with the 1.8 volt line on pin 29 of the lcd connector. I could very easily be wrong about that though.

War diese Antwort hilfreich?

Bewertung 1

2 Kommentare:

I concur. I am sending one board out at the first of the week and am sending this phone in with it.

von

Good choice. Let us know what the problem was when you get it back.

von

Einen Kommentar hinzufügen

Could also be that one of the pins bent or broke on the phone itself in the connection on the logic board. Check the pins where the display cables connect to.

War diese Antwort hilfreich?

Bewertung 0
Einen Kommentar hinzufügen

Antwort hinzufügen

justin epley wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 0

Insgesamt: 311