Zum Hauptinhalt wechseln

Zweite iPhone Generation. Modell A1241 mit 8 oder 16 GB Kapazität und schwarzer oder weißer Kunststoff-Rückseite. Die Reparatur ist leichter zu bewerkstelligen als beim iPhone 1. Es werden Schraubendreher, Hebelwerkzeuge und Saugnäpfe benötigt.

1158 Fragen Alle anzeigen

What soldering tip shall I use for soldering the display?

I am trying to solder, what I believe to be the power source ribbon to the logic board. Can someone recommend me a soldering iron, and tip to use with iPhones?

Thanks

Diese Frage beantworten Ich habe das gleiche Problem

Ist dies eine gute Frage?

Bewertung -1
Einen Kommentar hinzufügen

3 Antworten

Hilfreichste Antwort

Use one of temperature controlled soldering iron with a digital display such as the Weller WE1010 soldering iron. That way you will be able to precisely control the temperature of the iron to within 9 degrees Fahrenheit.

There is a guide for choosing the best soldering iron:

http://soldering-irons.com/best-solderin...

Regards

War diese Antwort hilfreich?

Bewertung 2

2 Kommentare:

Great link for advice

von

good answer +

von

Einen Kommentar hinzufügen

This one is great.

War diese Antwort hilfreich?

Bewertung 1
Einen Kommentar hinzufügen

did you break the old ribbon cable? because you shouldnt need to solder anything

War diese Antwort hilfreich?

Bewertung 0
Einen Kommentar hinzufügen

Antwort hinzufügen

infine0n wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 0

Insgesamt: 3,518