Zum Hauptinhalt wechseln

Aufpolierte Version des iPhone 3GS mit schnelleren Verarbeitungsgeschwindigkeit. Die Reparatur geht ähnlich wie beim 3G vonstatten und braucht nur einfache Schraubendreher und Hebelwerkzeuge. Modell A1303 mit 16 oder 32 GB Kapazität mit schwarzer oder weißer Kunststoffrückseite.

1500 Fragen Alle anzeigen

Glass replacement - home button resistance on push

Hi everyone,

Recently I replaced the glass on two iPhones 3GS. But every time, the home buttons feels a bit stuck. They don't 'click' anymore. It feels like there is some resistance. Does anybody have experienced the same problem? If so, is there a solution?

Thanks,

naf

Beantwortet! Antwort anzeigen Ich habe das gleiche Problem

Ist dies eine gute Frage?

Bewertung -1
Einen Kommentar hinzufügen

1 Antwort

Gewählte Lösung

I think set up is the same as 3g...open display up again, turn over and have a look at the 2 gold prongs on back of home button, sometimes they get flattened during taking apart. just slide a flathead screw driver under and lift slightly. just be gentle as they break easily (learned the hard way)also clean top of dock where they make connection.

War diese Antwort hilfreich?

Bewertung 0

3 Kommentare:

Thanks, but I don't have any problems with home buttons not working. The home buttons just don't make the 'click' sound when I press on them. They don't feel as smooth as before. It feels like they aren't fitted well.

von

nope, it still works it just takes more pressure? this sorted it for me several times.

von

Indeed, it takes more pressure. It feels like they are a bit stuck. How do I resolve this problem?

von

Einen Kommentar hinzufügen

Antwort hinzufügen

naf wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 0

Insgesamt: 1,594