Repariere deine Sachen Community Store

7,9 Zoll Display / Modell A1455 / Verfügbar in schwarz und weiß / Angekündigt am 23. Oktober 2012 / 16, 32 oder 64 GB Speicherkapazität

30 Fragen Alle anzeigen

Einstellungen

change the powerport and headphone jacket

I have an ide, but i will need some help....

i have the first ipad mini, and i think of putting the in my car, will 3d print a nice stand for it, but i will have som issues white the power and headphone, that need to go on the long side of the ipad. is it possible, i havet open a ipad mini, so don't know if i can just move them and make a new hole in the chassi

do u have any good information, pleas writ some lines down:)

Thanks

Diese Frage beantworten Ich habe das gleiche Problem

Ist dies eine gute Frage?

Ja Nein
Bewertung 0
Einen Kommentar hinzufügen

1 Antwort

Filtern nach:
Am hilfreichsten Neueste Älteste
Hilfreichste Antwort

Einstellungen

Daniel Berntsson there is not enough room to change the design. the headphone jack etc. use flat ribbon cables that would need to be redsigned to move the jack anywhere but where it currently is. Check this out. You may have to incorporated the current location into your design. It will be a lot easier than what you are currently thinking off.

War diese Antwort hilfreich?

Ja Nein
Bewertung 1

1 Kommentar:

mmmm now i have an other ide....

1. can i use the ipad.. hardware... and change the screen, for a 7" insted of the 7.9"?

2-. is it possebol to mirror the phone to an ipad.. and use the 7"scrren to navi in the iphone?

von

Einen Kommentar hinzufügen

Antwort hinzufügen

Daniel Berntsson wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 1

Insgesamt: 59