Repariere deine Sachen Community Store

Das Apple iPhone 5s wurde am 10. September 2013 angekündigt. Die Reparatur dieses Geräts ist ähnlich wie bei den Vorgängermodellen und erfordert Schraubendreher und Hebelwerkzeuge. Verfügbar mit GSM oder CDMA mit 16, 32 oder 64 GB in silber, gold und space grau.

3531 Fragen Alle anzeigen

Einstellungen

iPhone 5s Home Button works but doesn't click properly

I just replaced the screen on my iPhone 5s, Screen works fine however, the Home Button isn't clicking properly. It works but its not making that clicking noise and it feels different. Its not the way its seated in the chassis, (I know this because I have the same problem even with the the front assembly disconnected from the frame). I'm not sure what the issue is here or how to fix it. Please help!

Beantwortet! Antwort anzeigen Ich habe das gleiche Problem

Ist dies eine gute Frage?

Ja Nein
Bewertung 2
Einen Kommentar hinzufügen

3 Antworten

Filtern nach:
Am hilfreichsten Neueste Älteste
Gewählte Lösung

Einstellungen

Here is a perfect fix for you after doing a screen replacement. Loosening the screws is NOT always the best solution as the screws will easily back out and come off over time. The best solution is:

Completely take off the home button bracket and physically bend the bracket out wards slightly. Install the bracket back and screw the screws all the way, nice and tight. You may need to do this a few times to get the perfect press of the home button but eventually, you will. Will not take to many tries either. Most of the screens have different thicknesses and can cause the home button to not work sometimes. Do this and it'll fix your device right up with no more issues at all.

War diese Antwort hilfreich?

Ja Nein
Bewertung 4

1 Kommentar:

Good answer. I do this a lot with iPhone 5 and 6 series screen replacements. I rather aim for closest to original feeling on the home button clickyness.

von

Einen Kommentar hinzufügen

Einstellungen

If it is working then there is no reason to fix it will not cause anymore damage . If needs repaired you will have to take it to a micro-solder professional.

War diese Antwort hilfreich?

Ja Nein
Bewertung 1

3 Kommentare:

Thanks for the response, I feel like there is a reason to fix it because although it does function, it doesn't quite work properly. it takes more force than normal to activate the button.

von

Well if u want try putting a lube of some sort that does not damage electronics that should help a tons.

von

Found a reasonable solution by loosening the screws holding down the Home Button bracket. It's still not quite the same but it's better than it was before at least. Cheers for your help. :)

von

Einen Kommentar hinzufügen

Einstellungen

I've seen this before where people diy they screw the home button plate on backwards.

I would suggest rotate it and see if that solves your issue.

War diese Antwort hilfreich?

Ja Nein
Bewertung 0

1 Kommentar:

It was definitely not a case of this, I made sure it was the correct was around. Also this wasn't my first repair.

von

Einen Kommentar hinzufügen

Antwort hinzufügen

Stelios Sgoutas wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 1

Insgesamt: 5,577