Rep: 119
5
1
Hello everyone,
I've a problem with a iPhone 6s, 1 path is missing next to the wifi chip, can someone help me where I need to make a jumper?
right now the cameras and flashlight are not working.
please look picture!
Best regards Marvin
Hello @refectio ,
do you mean this? look picture please!
Ist dies eine gute Frage?
Rep: 221,4 Tsd.
15
289
806
Hello Marvin. You will need to create a micro-jumper from the bottom pad (the one that is missing) of FL3104 to either C3106 or C2109. See the attached image, I have highlighted them for you. The connection point on those capacitors is on the top pad (based on the image orientation).
Do you have the proper tools and experience to do this kind of work? If not, then you should look for a qualified micro-solderer to do this repair.
War diese Antwort hilfreich?
Hi!!,
Thanks for your answer, I appreciate this.
I'll let you know if I fix the problem.
That looks right. Have you tested the phone with this fix?
@refectio sorry for late responge, but it doesn't work. both sides have high resistance.
High resistance relative to what, ground? Measure on both sides of the filter to see if is okay. It should read close to 0 Ohm. If you measure a side relative to ground, then it should be high resistance.
Rep: 73
4
1
Jump to C3106 its under shield (bottom at your photo)
War diese Antwort hilfreich?
I don't know where to find C3106, can you please help me.
Rep: 1
1
1
War diese Antwort hilfreich?
Letzte 24 Stunden: 0
Letzte 7 Tage: 0
Letzte 30 Tage: 0
Insgesamt: 277
