Zum Hauptinhalt wechseln

Verkaufsstart Juni 2012, Model A1278. Intel Prozessor mit Turbo Boost, bis zu 512 MB DDR5 Video RAM

1194 Fragen Alle anzeigen

MagSafe blinks green and doesn't charge?

The other night I noticed my MagSafe blinking green for a second then off for a second intermittently (now that it's dead it blinks every two seconds or so?), didn't really think much of it until I opened my laptop the next day and saw the battery was down to around 60% even though it was plugged in all night. Tried playing around with the charger, tried different outlets, tried resting the smc, took the bottom case off and unplugged the battery and plugged it back in, and nothing seems to work. I thought the battery might be done because while trying to fix this I noticed I was over 1100 cycles now and when I clicked on the battery icon it said to replace it soon, but even still the computer should work fine while plugged in shouldn't it? Curious if anyone knows what's going on and what could fix it, hopefully for free as just last week I spent a bit of money to replace the hard drive cable and don't really want to put much more money into a computer if one things gonna go wrong after the other.

Diese Frage beantworten Ich habe das gleiche Problem

Ist dies eine gute Frage?

Punktzahl 0
Einen Kommentar hinzufügen

MacBook Akku Fix Kits

Ab $69.99

Buy Now

MacBook Akku Fix Kits

Ab $69.99

Buy Now

2 Antworten

Hilfreichste Antwort

Review this Apple T/N: Apple Portables: Troubleshooting MagSafe adapters. If needed clean the contacts of both the MagSafe adapter and the computer with a cotton Swab (Q-Tip) slightly dampened with 85% or better isopropyl alcohol.

Update (05/19/2017)

OK, I think you have either a bad battery or the charging logic is damaged.

Lets open the system following this IFIXIT guide and disconnecting the battery: MacBook Pro 13" Unibody Mid 2012 Battery Replacement Stop at Step 4. Now Plug in the MagSafe adapter are you able to start up the system?

War diese Antwort hilfreich?

Punktzahl 2

Kommentare:

I've tried pretty much everything on that list and now its working.

I left it plugged in over night and it managed to charge up to 36% and the MagSafe is a solid green, but as soon as I turned the laptop on it started blinking again and only charging every second...

von

How did you solve the problem?

von

Einen Kommentar hinzufügen

Did you try disconnecting the battery and then plugging magsafe in?

War diese Antwort hilfreich?

Punktzahl 0

Kommentare:

No I wasn't able to start the system with the battery disconnected.

von

Einen Kommentar hinzufügen

Antwort hinzufügen

chris schlief wird auf ewig dankbar sein.
Statistik anzeigen:

Letzte 24 Stunden: 7

Letzte 7 Tage: 66

Letzte 30 Tage: 342

Insgesamt: 6,691