iPhone 6 Plus no back light Problems

No, I don't have ZXW however, I might have the problem now after having a look further. I now suspect long screw damage. Let me post some pictures so you can judge this because I am just starting out at board level repair and I don't know much but to me, this looks like long screw damage.

ZXW is an invaluable tool to have. You can get free schematics online and I used them too when first starting out, but to have them at hand makes a world of difference. Actually, from the pics, it doesn't look bad, I just did a long screw damage repair a couple days ago and it looked much worse! and only had a few traces damaged I repaired. It just doesn't look very deep, just scratching the top layer. Is it very ... "Spongy" around the screw holes? Like it may have lifted the screw-hole off the board tearing traces? Were the Filters bad when you tested them?

Yes the all the filters related to backlight were tested and has continuity accross however the two filters that I mentioned were just solder bridges and in the pictures you can see were I have removed those. I have ordered the two filters and will fit them soon when they come and has also ordered a jumper wire that I can use for the long screw damage . What traces lead to backlight in the 6 Plus? I think it’s the right screw but I’m not sure. Also would I be able to get a price urge of ZXW of the traces in the screw hole? Thank you very much for the help guys

@iphonerepairtom ... Here is the Schematic you are asking for in an update on my answer. If this helped you answer your question(s) please mark as chosen solution. Best of luck!