Repariere deine Sachen Community Store

Herausgegeben am 25. September 2015. Model A1687/A1634. Die Reparatur des 6s gestaltet sich ähnlich zu denen früherer Generationen; benötigt werden Schraubenzieher und Hebelwerkzeuge. Verfügbar mit GSM oder CDMA / 16, 64 oder 128 GB / Silber, Gold, Space Grau oder Roségold.

2688 Fragen Alle anzeigen

Einstellungen

Device won't power on after screen replacement

Hi! I'm relatively new to smartphone repair, but been in IT for years. I've run into an odd issue with a screen replacement on an iPhone 6s.

With the original screen connected, (with no home button) the device powers on and responds to the vibration rocker switch.

I turn the device off, swap in an identical replacement screen from ifixit, (albeit white instead of black, also with no home button) and the device REFUSES to turn on.

Done this about 10 times with the same results, so I'm fairly certain I'm not shorting the phone out with the replacement screen. What could possibly be wrong?

Diese Frage beantworten Ich habe das gleiche Problem

Ist dies eine gute Frage?

Ja Nein
Bewertung 0
Einen Kommentar hinzufügen

2 Antworten

Filtern nach:
Am hilfreichsten Neueste Älteste
Hilfreichste Antwort

Einstellungen

did you try the old screen after the replacement, if so does the vibration work again

War diese Antwort hilfreich?

Ja Nein
Bewertung 1

1 Kommentar:

Yep, the device *only* powers on and vibrates when I have the original LCD cable connected. I suspect it may be a damaged connector.

von

Einen Kommentar hinzufügen

Einstellungen

You may have gotten a bad screen .

Is there 1 connection or two

War diese Antwort hilfreich?

Ja Nein
Bewertung 0

3 Kommentare:

There are 3 total connections, I ordered the full assembly. But the phone refuses to power on with anything other than the original screen display cable. I suspect the connector on the logic board may be damaged...

von

Try plugging in just the lcd and touch connector (leave the small one to the right off) and see if it comes on. Sometimes the front camera flex can be faulty causing this issue.

von

Unfortunately I tried every possible arrangement of connections. The only way I ever get the phone to power on is when the original (broken) display connector is attached. With or without the other 2 connectors. If the original display connector isn't attached, it doesn't power on...

von

Einen Kommentar hinzufügen

Antwort hinzufügen

Bay wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 0

Insgesamt: 51