Zum Hauptinhalt wechseln

Das iPhone 6 Plus mit dem 5,5 Zoll Display ist die größere Version des iPhone 6 und seit dem 19. September 2014 auf dem Markt.

1525 Fragen Alle anzeigen

Reballing iPhone 6 Baseband IC

I am wondering what temperature does my hot air station needs to be set at to remove the baseband chip. I tried 220 Celsius and it won’t budge . Is there a technique in doing this. I’m practicing on dead boards just to see if I can remove the ic chip and reball it. Any help would be appreciated

Beantwortet! Antwort anzeigen Ich habe das gleiche Problem

Ist dies eine gute Frage?

Bewertung 0
Einen Kommentar hinzufügen

1 Antwort

Gewählte Lösung

Hi Richard. This is a bit late but hopefully it can help out others who have the same issue.

The melting point for lead-free solder is ~220C, depending on the actual alloy. That means you need to get the logic board, IC and solder to that temperature in order to get the solder to "flow". Setting your hot air station at 220C doesn't work for several reasons:

  1. Unless you have calibrated your hot air station, it could be off by as much +/- 20C, especially lower cost stations.
  2. The measured temperature of a hot air station is somewhere within the metal tube, before exiting via the nozzle. This will depend on the station but this means that the actual air temperature hitting the logic board will be significantly lower due to heat loss as it passes through ambient air.
  3. Finally, to bring the board temperature to the melting point, you have to apply more heat to take into account all of the losses. You also have to find a good balance between being too hot to melt plastics near your target and not hot enough that it takes too long causing collateral damage.

Ultimately, you have to experiment with your station and your technique but most techs doing mobile repair use 360-380C.

War diese Antwort hilfreich?

Bewertung 2
Einen Kommentar hinzufügen

Antwort hinzufügen

Richard Rivera wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 1

Letzte 30 Tage: 8

Insgesamt: 1,876