Repariere deine Sachen Community Store

Herausgegeben am 25. September 2015. Model A1687/A1634. Die Reparatur des 6s gestaltet sich ähnlich zu denen früherer Generationen; benötigt werden Schraubenzieher und Hebelwerkzeuge. Verfügbar mit GSM oder CDMA / 16, 64 oder 128 GB / Silber, Gold, Space Grau oder Roségold.

2687 Fragen Alle anzeigen

Einstellungen

CPU getting really hot and barely charging

Ive just recently changed the battery on my iphone and the LCD and it was working perfectly fine, however when i changed the battery i teared the flex cable for the silent swtich. So I replaced the whole chassis and put everything back into place and replaced the flex cable but for some reason the phone turns on when I put the power cable in but does not charge/goes up a few % but does not show the lightning icon. The CPU gets really hot and the flashlight does not work.

Block Image

I have removed the EMI shield for a better view of the circuit board.

Beantwortet! Antwort anzeigen Ich habe das gleiche Problem

Ist dies eine gute Frage?

Ja Nein
Bewertung 1
1 Kommentar

I can also note that i have used super glue on the lock button and I dont know if thats too close to the cpu causing it to get hot.

von

Einen Kommentar hinzufügen

1 Antwort

Filtern nach:
Am hilfreichsten Neueste Älteste
Gewählte Lösung

Einstellungen

With so many things changed at the same time, that's a lot of variables that need to be eliminated.

Firstly, why did you change the chassis if all you did was tear the power button flex? Yet you also mentioned that after the chassis change, you replaced the flex. Was this an empty chassis or one from another device?

Fake charging is usually logic board related (Tristar) but in this case, you may have damaged the charge port flex.

At this point, you need to troubleshoot with know good parts and try only one thing at a time. Start with Lightning Port flex and battery. If you don't have access to known-good parts, you could consider asking a shop to look at this.

War diese Antwort hilfreich?

Ja Nein
Bewertung 4

4 Kommentare:

Would there be any way to check if it is the charging port like disconnecting a connector?

von

If you disconnect the charging port, you won't be able to test if the charging works or not.

von

Would there be a way to test the charging port by using a multimeter?

von

Not really...

von

Einen Kommentar hinzufügen

Antwort hinzufügen

Harry wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 1

Letzte 30 Tage: 3

Insgesamt: 161