Zum Hauptinhalt wechseln

Herausgegeben am 25. September 2015. Model A1687/A1634. Die Reparatur des 6s gestaltet sich ähnlich zu denen früherer Generationen; benötigt werden Schraubenzieher und Hebelwerkzeuge. Verfügbar mit GSM oder CDMA / 16, 64 oder 128 GB / Silber, Gold, Space Grau oder Roségold.

2689 Fragen Alle anzeigen

iPhone says its not charging?

I've replaced the charging port and checked the battery terminal while the phone was turned on with a multimeter and I'm getting 3.8 V down to 0.3V and it keeps jumping. Although the battery displays 3.67V with a voltmeter when it should be around 3.8. Is that healthy? As I can't charge my phone as it says it's not charging but detects the charger being put in.

Beantwortet! Antwort anzeigen Ich habe das gleiche Problem

Ist dies eine gute Frage?

Bewertung 0
1 Kommentar

The battery voltage is a constant 3.67V but the main terminals it plugs into are jumping up and down.

von

Einen Kommentar hinzufügen

1 Antwort

Gewählte Lösung

Sounds like you have an issue with the charging circuit, specifically Tristar. It could also be related to Tigris or even the PMIC (let's hope not). As for the battery voltage, it can read anywhere from 3V to 4.25V depending on it's charge state. Anything lower than 2.85 will not allow the phone to boot.

Ideally, you should have your phone looked at by an experienced micro-solderer to properly diagnose the issue as this kind of repair is not DIY.

War diese Antwort hilfreich?

Bewertung 4
Einen Kommentar hinzufügen

Antwort hinzufügen

Harry wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 0

Insgesamt: 1,860