Repariere deine Sachen Community Store

Herausgegeben am 25. September 2015. Model A1687/A1634. Die Reparatur des 6s gestaltet sich ähnlich zu denen früherer Generationen; benötigt werden Schraubenzieher und Hebelwerkzeuge. Verfügbar mit GSM oder CDMA / 16, 64 oder 128 GB / Silber, Gold, Space Grau oder Roségold.

2690 Fragen Alle anzeigen

Einstellungen

Toggling Silent/mute switch doesn't work. Then mutes/unmutes by itself

My iphone 6s mute/silent switch doesnt respond correctly when I toggle it. Switch seems to be working fine mechanically (been cleaned as much as possible from the outside).

Further, the mute/silent function changes on its own. Sometimes ever couple seconds (even though switch not moving).

Seems the audio/power cable (and bracket) need to be replaced. Does the button also need to be replaced? Anyway I can open it up and the solution will be simpler?

Beantwortet! Antwort anzeigen Ich habe das gleiche Problem

Ist dies eine gute Frage?

Ja Nein
Bewertung 0
Einen Kommentar hinzufügen

1 Antwort

Filtern nach:
Am hilfreichsten Neueste Älteste
Gewählte Lösung

Einstellungen

It definitely sounds like the button on the flex is damaged. You can change this yourself.

This is not the simplest DIY repair so if you're all thumbs, I wouldn't recommend it as a lot can go wrong here. If you're a good fixer in general and have a delicate touch, you should certainly try it. The repair guide is here.

War diese Antwort hilfreich?

Ja Nein
Bewertung 5

5 Kommentare:

YES! I saw that. Thank you. So I dont have to replace the mechanical switch? Just the cable and bracket?

von

The physical actuator is on the flex. The button you push only pushes itself against the actuator.

von

I understand. Is it possible there is just a poor connection/dirt between the actuator and the button? Or does the flex definitely need replacing?

von

It's possible, sometimes it can get out of alignment. You'll have to open it up and take a closer look.

von

When I order the volume button cables I usually make sure it comes with the metal bracket and the vibrate switch attached with the metal bracket too.

What generally happens is that the plastic 4 holes gets loose from the metal bracket for the switch making it hard to switch or getting stuck in a certain position.

A worn out switch or teared ribbon cable may cause the vibrate switch to go on and off randomly.

von

Einen Kommentar hinzufügen

Antwort hinzufügen

Adam Comis wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 0

Insgesamt: 278