Repariere deine Sachen Community Store

Modell A1311 / Mitte 2011 / 2.5 & 2.7 GHz Core i5 oder 2.8 GHz Core i7 Prozessor

432 Fragen Alle anzeigen

Einstellungen

iMac No Display, no 4th diagnostic led

HI,

could someone tell me where I can find pinout for espower pwb-iv49151t inverter board please ?

I need to test it as I've just receive replacement screen for my iMac and it's still dead.

symptoms :

-4th diagnostic led not on.

-when dp ribbon disconnected the fans go full blast.

-when all the cables are connected the internal screen is discovered as online by system info and starts with internal as main screen (4th led still off).

-when disconnected from inverter board screen is not discovered.

the Mac works fine with external display.

if anyone have any suggestions I'll be forever grateful.

Seb

Beantwortet! Antwort anzeigen Ich habe das gleiche Problem

Ist dies eine gute Frage?

Ja Nein
Bewertung 2
Einen Kommentar hinzufügen

2 Antworten

Filtern nach:
Am hilfreichsten Neueste Älteste
Gewählte Lösung

Einstellungen

Ok, so after bit more testing it turned out that the problem was onboard DP connector, all working as intended now.

War diese Antwort hilfreich?

Ja Nein
Bewertung 1

2 Kommentare:

So, I have an imac 5k that has no backlight. Did you just change the lvds cable? Or did you have to solder? Thanks!

von

sorry for the delay, it's probably too late now but to answer your question, it was a soldering job I'm afraid.

von

Einen Kommentar hinzufügen
Hilfreichste Antwort

Einstellungen

LED 4 - Indicates that the computer and the LCD display panel are communicating. This LED will be ON when the computer is turned on and video signal is being generated. If the LED is ON and there is no image on the LCD display panel, the LCD display panel or LED driver board might be installed incorrectly or need replacement.

iMac Intel 21,5" EMC 2428 LED Treiberplatine austauschen

War diese Antwort hilfreich?

Ja Nein
Bewertung 1

1 Kommentar:

I know all that, I've service manual for this model, the 4th led is NOT illuminated and before I splash out on new inverter board I'd like to find a way of diagnosing it, eg test the pinouts.

von

Einen Kommentar hinzufügen

Antwort hinzufügen

Sebastian Nastarowicz wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 1

Letzte 30 Tage: 21

Insgesamt: 1,681