Repariere deine Sachen Community Store

Mobilversion von Apples iPad Air der 2. Generation. Modellnummer A1567

86 Fragen Alle anzeigen

Einstellungen

iPad sensitivity issues after new screen

After replacing the LCD/digitizer on my iPad Air 2, the touch sensitivity has been really off. While I’m typing, I’ll press any key once and it’ll enter it 1-5 times. While I’m scrolling through websites, it won’t always recognize the speed I’m scrolling and will “click” on random links I’m trying to scroll over.

Note: I don’t have the glass and iPad adhered back together yet. I have all the ribbons and shields in place but the adhesive is still covered. Also, I had to do a DFU mode restore because of the damage done to the screen before the replacement, see Can a new LCD and digitizer fix this?

Any help/advice will be appreciated!

Diese Frage beantworten Ich habe das gleiche Problem

Ist dies eine gute Frage?

Ja Nein
Bewertung 0
Einen Kommentar hinzufügen

1 Antwort

Filtern nach:
Am hilfreichsten Neueste Älteste
Hilfreichste Antwort

Einstellungen

Either it's a defective screen, the ribbon cables were folded / squished or

(This one is probably not the issue as it's not seated on the iPad yet) that the screen is sit on iPad housing that has dented corners / bent frame stopping it from sitting flush

War diese Antwort hilfreich?

Ja Nein
Bewertung 2

3 Kommentare:

If it’s not completely flat, would it cause this issue?

von

Yes, too much flexing on the glass itself will cause the touch to not work properly and you end up getting the ghost touching effect.

von

Good to know. I’m thinking I’m gonna go through with a return though. It’s been laying flat and doesn’t take long before it acts too sensitive or not sensitive enough

von

Einen Kommentar hinzufügen

Antwort hinzufügen

Mike wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 2

Letzte 30 Tage: 7

Insgesamt: 428