Repariere deine Sachen Community Store

Die Wi-Fi Version des iPad Air mit der Modellnummer A1474 ist in Space Grau und Silber erhältlich. Sie enthält einen A7 Prozessor und ist mit 16, 32, 64 oder 128 GB Speicherkapazität erhältlich.

299 Fragen Alle anzeigen

Einstellungen

Cannot get antennas to snap into place

I'm doing a battery replacement, everything went perfectly, really easy job, until... it came time to put the antennas back in place. I cannot seem to get them to snap in place, having done work on iPhones before I know they can be fiddley cause they are so small but an hour later and a sore neck and I am no closer to getting these antennas to snap back in. Anyone have any tips, is there a particular knack to these?

Update (07/13/2018)

Pic of the Board

Block Image

Pic of right antenna

Block Image

Pic of left antenna

Block Image

Beantwortet! Antwort anzeigen Ich habe das gleiche Problem

Ist dies eine gute Frage?

Ja Nein
Bewertung 0
Einen Kommentar hinzufügen

2 Antworten

Filtern nach:
Am hilfreichsten Neueste Älteste
Gewählte Lösung

Einstellungen

Unfortunately, the connectors on the logic bard are physically damaged. You could try to cut off the portion that is no longer circular but that will require some very fine tip cutters. Perhaps with some fine tweezers you could manage to "break" them in the right spot by bending them back and forth.

However, the best solution is to have new connectors micro-soldered on the logic board. This is not a DIY repair unless you have experience micro-soldering with hot air stations.

War diese Antwort hilfreich?

Ja Nein
Bewertung 3

1 Kommentar:

Aww man that is annoying, thanks for the info though. I have a guy who does soldering for me, so I'll let him handle it thanks.

von

Einen Kommentar hinzufügen

Einstellungen

i use my bent nose tweezers to hold the clip at its "neck," then use a torque 6 driver to push straight down on the head. They shouldn't be too fiddly though. there may be damage to the connector or the clip itself. so if you can upload a magnified picture of the two, i can help inspect it.

War diese Antwort hilfreich?

Ja Nein
Bewertung 1

2 Kommentare:

Hey Scott, thanks for your quick response, have updated with some pics would be great if you could take a look, thanks!

von

not a problem. i see my request for pictures allowed another to finalize the answer for you. :) sorry for the outcome though. those are some pretty simple components to swap out. (in the scale of SMT components that is) easy to swap out of another board if you have one, or cheap to buy if you dont.

von

Einen Kommentar hinzufügen

Antwort hinzufügen

Mary Ellen wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 1

Insgesamt: 57