Zum Hauptinhalt wechseln

Herausgegeben am 25. September 2015. Model A1687/A1634. Die Reparatur des 6s gestaltet sich ähnlich zu denen früherer Generationen; benötigt werden Schraubenzieher und Hebelwerkzeuge. Verfügbar mit GSM oder CDMA / 16, 64 oder 128 GB / Silber, Gold, Space Grau oder Roségold.

2687 Fragen Alle anzeigen

iPhone got a few drops of water in now lcd's wont work

my iphone 6s got a few drops of water in it , i disconnected battery and left it to dry for 3 days , switched back on , worked for a min , then lcd turned off , so i got a replacement screen tried it on another iphone 6s first , then plugged it in to the water damaged phone and no display , but the phone works , i restored it via itunes , etc can hear it ringing etc , just lcd will not work , maybe damage to motherboard , but where do i look , thanks for any help

Diese Frage beantworten Ich habe das gleiche Problem

Ist dies eine gute Frage?

Bewertung 0
Einen Kommentar hinzufügen

1 Antwort

Shine a bright LED flashlight at the screen and boot it up to check for a bad backlight. It seems likely that your backlight fried. This is not a bad repair as far as board work goes, but not one to attempt unless you are well versed in micro soldering and have a good setup for it.

War diese Antwort hilfreich?

Bewertung 0
Einen Kommentar hinzufügen

Antwort hinzufügen

shaz wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 0

Insgesamt: 31