Zum Hauptinhalt wechseln

detached the female 3 pin connector on Garmin Edge 800

I unplugged the battery 3.7v li-ion / 1100 aMh, 4.1 Wh and accidentally detached the female 3 pin connector which was soldered on. Its so tiny that I lost it and I can’t find one anywhere .There are no identifiers to be found nor any schematics that I can find. So if anyone can tell me where I can get it (the female part) I thank you. I’m capable of soldering it on if I can just figure out where it was soldered to.Thanks

GARMIN 361-000035-00 Battery

Beantwortet! Antwort anzeigen Ich habe das gleiche Problem

Ist dies eine gute Frage?

Bewertung 0
Einen Kommentar hinzufügen

2 Antworten

Gewählte Lösung

A few minutes after leaving this request I found the entire section with a battery already attached for $10 on ebay . So I'm not going to have to do it after all. Thanks though. John

War diese Antwort hilfreich?

Bewertung 0
Einen Kommentar hinzufügen
Hilfreichste Antwort

Hi @odonovj ,

Can’t find the connector but was wondering if it may be possible to solder the battery wires directly onto the terminals at the back of the male connector on the motherboard or remove the male connector from the motherboard and solder the wires directly onto the motherboard itself

Below is an image taken from a Garmin Edge 800 battery replacement video showing the wiring colours to the female connector. This should help denote the order in which they should then be terminated onto the board.

Block Image

(click on image to enlarge for better viewing)

Just an idea if you can’t find a suitable connector.

War diese Antwort hilfreich?

Bewertung 1
Einen Kommentar hinzufügen

Antwort hinzufügen

John M O'Donovan wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 0

Insgesamt: 174