Vorgestellt am 16. September 2016. Modelle A1661, A1784, und A1785. Verfügbar mit 32, 128 oder 256 GB internem Speicher in den Farben Rose-Gold, Gold, Silber, Schwarz, Diamantschwarz und Rot.

696 Fragen Alle anzeigen

Phone dead after replacing screen > didn't disconnect battery?

I replaced my IPhone 7 plus screen and it worked.

However the touch button wasn’t seated properly so I reopened and re-seated.

Now, I remember when reading on the screen replacement manual that came with it “make sure to disconnect battery before working or guaranteed failure” to that effect.

But because I was in a rush this time i dont think i disconnected the battery prior to removing the screen.

Now the phone is completely lifeless.

Im wondering if the phone has a fuse, or what would be the most likely cause of a dead phone after replacing screen without disconnecting battery properly?

Im hugely distraught from this since it was clearly working before i re-opened to fix home button..

Any help appreciated

Diese Frage beantworten Ich habe das gleiche Problem

Ist dies eine gute Frage?

Punktzahl 0


@jessabethany @refectio I think you guys would know what’s up with this one.


Einen Kommentar hinzufügen

Kostenloser Versand für alle Bestellungen über 100 $ oder mit einem Pro Tech Toolkit!

Schau dich im Store um

2 Antworten

Hilfreichste Antwort

It’s very important to always disconnect the battery before disconnecting/reconnecting the screen assembly. The issue is that the LCD connector has pins that have high voltages (i.e. the backlight is ~20V) and ground in very close proximity. When you fumble around trying to line up the connector plug to the receptacle, you can short out the voltage rail and cause damage to the components in the backlight circuit. If you’re lucky, then only a backlight filter is damaged but other times, the entire circuit could be affected. Either way, this type of repair requires micro-soldering and isn’t really a DIY repair.

To test for this, plug your device into a charger or an iTunes enabled computer. Then shine a bright flashlight on the screen. If you can see a dim image, then the backlight circuit has been damaged. If you can’t see an image at all, then it may be the LCD circuit that is damaged.

If iTunes doesn’t recognized the device than the problem is more than just a screen or backlight issue.

War diese Antwort hilfreich?

Punktzahl 4


Thank you Minho, using a flashlight i saw nothing on the screen. Is there any chance any circuitry on the main board could be damaged? or is it most likely just the LCD screen assembly? thanks for the useful answer


If the phone didn't suffer any physical damage prior to or during the repair, then odds are it's a logic board issue. The only way to know for certain is to try a new or preferably a known-good screen.


Einen Kommentar hinzufügen

You might have shorted something in your haste. I’m sorry for your loss

War diese Antwort hilfreich?

Punktzahl 0
Einen Kommentar hinzufügen

Antwort hinzufügen

Matt Rowlands wird auf ewig dankbar sein.
Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 4

Insgesamt: 55