Zum Hauptinhalt wechseln

Aufpolierte Version des iPhone 3GS mit schnelleren Verarbeitungsgeschwindigkeit. Die Reparatur geht ähnlich wie beim 3G vonstatten und braucht nur einfache Schraubendreher und Hebelwerkzeuge. Modell A1303 mit 16 oder 32 GB Kapazität mit schwarzer oder weißer Kunststoffrückseite.

1500 Fragen Alle anzeigen
Frage geschlossen

Soldering the LCD connector

Hi,

what temperature should i use to solder the pins on the LCD-connector (1). The former owner pulled a little bit to hard, now some of the pins are...lets say disconnected.

I use a WELLER EC 2002 with a very fine tip and i already looked for a new LCD. So why shouldn´t i try to solder it, its ruined anyway.

Beantwortet! Antwort anzeigen Ich habe das gleiche Problem

Ist dies eine gute Frage?

Bewertung 0
1 Kommentar

If one of these answers fixed your problem please hit the "accept" in list that has "History Edit Flag Accept Comment" located to the upper right of your question so we can remove it from the unanswered list. Thanks.

von

Einen Kommentar hinzufügen

3 Antworten

Gewählte Lösung

I wanted to solder the connector back to the cable of the LCD. I've tried it with 320°C but that didn't worked. A day later the new LCD arrived so i didn't tried it anymore.

War diese Antwort hilfreich?

Bewertung 2

2 Kommentare:

The temperature has to be above 320°C...just to get it off the unanswered list.

von

thanks

von

Einen Kommentar hinzufügen

I am not clear on what you are soldering. The connector that the LCD plugs into on the logic board?

War diese Antwort hilfreich?

Bewertung 0
Einen Kommentar hinzufügen

spam

War diese Antwort hilfreich?

Bewertung 0

1 Kommentar:

all your answers are just links to a pay service...

von

Einen Kommentar hinzufügen
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 0

Insgesamt: 4,466