Rep: 185
4
8
Hey i Got an iphone 7 After i did a audio IC reball it dident start up. when i restore it it is stuck at ‘‘updating SE firmware. i reballed baseband and all the chips on the left side of the board. I use a heating plate so this can be done without hurting the pmic or the CPU. i still got this error. There are no shorts in the circuit.
Anyone experienced this before?
Ist dies eine gute Frage?
Rep: 159,8 Tsd.
11
191
368
Did you do the jumpers for the few pads that have a weak connection under the audio IC? This is needed for a permanent fix for audio IC fault.
War diese Antwort hilfreich?
thanks ben, but thats not the problem. i,m aware of the jumpers.
Does any one know how to fix this without taking the whole mobo apart and removing the base band and $@$* likethat or should i let some one repair it just give me a quik and simple answer
War diese Antwort hilfreich?
That's not a modular part replacement repair, you'll need a Pro to get it fixed.
yo tambien tengo el mismo problema
War diese Antwort hilfreich?
i have same problem
but when i update get error -1 with 3utools
80% software take
War diese Antwort hilfreich?
Letzte 24 Stunden: 0
Letzte 7 Tage: 7
Letzte 30 Tage: 36
Insgesamt: 2,769
1 Kommentar
I have same problem with iPhone 6S Plus that has drop to the fall and always restart.
von Sommas Prabpan