Repariere deine Sachen Community Store

Modell A1502 / 2,6 GHz (Turbo Boost bis zu 3,1 GHz) oder 2,8 GHz (Turbo Boost bis zu 3,3 GHz) Dual-Core Intel Core i7 Prozessor mit 4MB geteiltem L3 Cache.

494 Fragen Alle anzeigen

Einstellungen

Recommendation for an adhesive that doesn't instantly bond?

I am planning on mounting a new 13” LCD panel on a Mid 2014 MBP.

From what I’ve read and seen, you must execute several steps in exact order. If you skip any of them inadvertently, or misalign the panel, you must correct the problem by unmounting the panel. This is the only part of the procedure that terrifies me most as it poses a high risk of cracking an expensive panel.

Are there any double-sided tapes or adhesives available for mounting the LCD which doesn’t instantly form a high strength bond, giving you the ability to align or remove the LCD more easily, if needed?

Beantwortet! Antwort anzeigen Ich habe das gleiche Problem

Ist dies eine gute Frage?

Ja Nein
Bewertung 0
Einen Kommentar hinzufügen

2 Antworten

Filtern nach:
Am hilfreichsten Neueste Älteste
Gewählte Lösung

Einstellungen

When I do replace the cover glass panel on the older Unibody’s I use Tesa 61395 Tape As long as you don’t press it down firmly you can still shift the glass if needed. Then, once in place I put a 5 lb weight which presses evenly across the entire surface via a cut piece of plywood covered with felt.

Tesa 61395 Tape Bild

Produkt

Tesa 61395 Tape

$5.99

War diese Antwort hilfreich?

Ja Nein
Bewertung 1
Einen Kommentar hinzufügen
Hilfreichste Antwort

Einstellungen

I hope you are not thinking about working on the guts of a Retina display.

Here’s how to replace the display assembly:

MacBook Pro 13" Retina Display Mitte 2014 Displayeinheit austauschen

War diese Antwort hilfreich?

Ja Nein
Bewertung 2

5 Kommentare:

I know how to replace the assembly, but I am asking specifically about the adhesive for boding the LCD panel.

von

Review this: MacBook Pro Retina Display Teardown

I really don't recommend taking the panel apart!

von

I don't either, but what would you do with a perfectly good LCD panel with a housing in bad condition? Luckily, I removed the lcd without issue, but putting it back on is tricky, since I often skip steps or do them incorrectly.

von

What I do is slap a hard cover on it: https://www.amazon.com/s?k=macbook+pro+1...

von

@mayer It's an acceptable solution for a machine for personal use, but for refurbishing for resale, it is less than ideal. Anyway, I have successfully refurbed a dozen of these displays and they're tricky and terrifying at first, but if you're very careful and methodical, it is doable.

von

Einen Kommentar hinzufügen

Antwort hinzufügen

AppleGuyPie wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 1

Letzte 7 Tage: 1

Letzte 30 Tage: 1

Insgesamt: 59