Zum Hauptinhalt wechseln

Herausgegeben am 25. September 2015. Model A1687/A1634. Die Reparatur des 6s gestaltet sich ähnlich zu denen früherer Generationen; benötigt werden Schraubenzieher und Hebelwerkzeuge. Verfügbar mit GSM oder CDMA / 16, 64 oder 128 GB / Silber, Gold, Space Grau oder Roségold.

2588 Fragen Alle anzeigen

Touch id sometimes stops working after screen replacement

Hello, so i’ve replaced the screen of my iphone 6s and transfered the original home button. Everything went fine, i had set up touch id and was succesfully using it, until next day the phone stopped picking up my fingerprint. I then tried rebooting the device, soft reset, hard reset, but nothing helped. I figured it must be hardware related, so opened up the phone , disconected and then reatached the home button, turned the phone on while it was opened and the touch id was working again. So then i put all the metal plates again, screw in all the screws in, basically seal the phone again, and the touch id stops working again. I assume the ribbon cables aren’t broken, because i could set up the touch id, and it’s also not software, because i erased the phone multiple times, have the latest ios installed. Anyone faced anything like this before? Any ideas on how to fix this?

Update (10/23/2019)

Turns out, all of the screens i bought from china were defected in some ways, and none of them supported touch id

Beantwortet! Antwort anzeigen Ich habe das gleiche Problem

Ist dies eine gute Frage?

Bewertung 0
Einen Kommentar hinzufügen

1 Antwort

Gewählte Lösung

When you restart the phone does it come up as a notification that Touch-ID is not working?

And have you tried with the old screen if touch-ID works?

Could be the new screen that has a faulty flex cable for home button.

War diese Antwort hilfreich?

Bewertung 1
Einen Kommentar hinzufügen

Antwort hinzufügen

Matt101 wird auf ewig dankbar sein.

Letzten 24 Stunden: 0

Letzten 7 Tage: 0

Letzten 30 Tage: 0

Insgesamt: 31