Zum Hauptinhalt wechseln

Is there a good way to ensure adhesion to frame near charging port?

I was recently put on the task of repairing a bunch of broken iPads at work and so far the iPad 10.5s have been the biggest struggle. The primary issue I've been running into is a roughly 2 inch width region of the screen seems to not adhere to the frame above the charging port. I've been using a Prime Tech Tools mobile repair vice to apply even pressure to the screen, as well as Tesa tape and adhesion promoter. The rest of screen/frame mount points adhere brilliantly, it's just the one spot causing trouble. Any advice or a point in the direction of a guide that may address this more closely would be greatly appreciated.

N. Batson

Diese Frage beantworten Ich habe das gleiche Problem

Ist dies eine gute Frage?

Bewertung 0
Einen Kommentar hinzufügen

1 Antwort

Most screens have an adhesive that has to be heated to a certain temperature with a heat gun to adhere properly.

War diese Antwort hilfreich?

Bewertung 0

1 Kommentar:

Unfortunately this doesn't seem to be the issue, I've been applying heat with a heat gun prior to clamping the device to no avail.

Thanks for the help,

N. Batson

von

Einen Kommentar hinzufügen

Antwort hinzufügen

akwonder1 wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 0

Insgesamt: 43