Rep: 37
2
1
I’m not sure what exactly is wrong. Presumably something is wrong with the connection between the switch and the joycon. I tried cleaning the contacts to no avail. Any suggestions?
Ist dies eine gute Frage?
Rep: 25
1
Air duster. Before you tear anything apart, remove the Joycon that is having the issue. Give that rail on the physical switch a few hits of air and it should work. A little dust gets in there and it stops the connection.
War diese Antwort hilfreich?
It worked for me. Thanks.
So is that how you fix a water damage Joy con
Rep: 25
2
2
Having the same issue right now.
Replacing the contacts is one thing you might have to take into consideration. It depends on where the connection error comes from though. If you have some extra pair of non-faulty joycons flying around try them out, if the switch doesn’t recognize them either you’ll have to replace the contacts in the Switch’s rails. If otherwise, you’ll need to replace the joycon’s contacts.
War diese Antwort hilfreich?
You can try to reconnect the battery to the motherboard on the joy-con and if that does not work then make sure the ribbon cables for the rail on the joy-con are attached correctly to their ports on the motherboard.
War diese Antwort hilfreich?
Letzte 24 Stunden: 6
Letzte 7 Tage: 47
Letzte 30 Tage: 265
Insgesamt: 26,398
