Zum Hauptinhalt wechseln

Zweite iPhone Generation. Modell A1241 mit 8 oder 16 GB Kapazität und schwarzer oder weißer Kunststoff-Rückseite. Die Reparatur ist leichter zu bewerkstelligen als beim iPhone 1. Es werden Schraubendreher, Hebelwerkzeuge und Saugnäpfe benötigt.

1158 Fragen Alle anzeigen

Power button is jammed and wont respond and LCD problem

I replaced the touch screen on my iphone 3G. The top power button is jammed and wont respond. Other problem is that the LCD has horizontal lines and colors are all opposite. Any suggestions

Beantwortet! Antwort anzeigen Ich habe das gleiche Problem

Ist dies eine gute Frage?

Bewertung 0
Einen Kommentar hinzufügen

1 Antwort

Gewählte Lösung

You can unscrew the bracket to the power button and hope you can readjust. Sometimes the housing and the bezel separates and this can cause the same issue. You'd have to glue the bezel back to the housing. As for the LCD, you damaged it somehow, just purchase a new one and replace.

War diese Antwort hilfreich?

Bewertung 2

2 Kommentare:

Also just found out that ear piece doesnt work either now. Any solutions to that?

von

You may have just damaged the #3 ribbon when dealing with the screen assembly, it is very fragile. Replace it using this guide:

iPhone 3GS Proximity Sensor Ribbon Replacement

von

Einen Kommentar hinzufügen

Antwort hinzufügen

Matt Badeaux wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 0

Insgesamt: 399