Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Store

iPad Mini mit 7,9 Zoll Display und 16, 32 oder 64 GB Speicherkapazität.

769 Fragen Alle anzeigen

My Ipad Mini touch isnt working after I replaced my digitizer?

After i plugged in the Battery, LCD, and new Battery, the screen opens and all the buttons work, but i cant use the touch screen. I looked at the connector but nothing seems to be broken.

So I had cracked my iPad a few years ago and recently decided to fix the screen, before i unplugged the LCD, Battery, and old digitizer everything was working just fine, but now when after i plugged in the Battery, LCD, and new Battery, the screen opens and all the buttons work, but i cant use the touch screen.

Beantwortet! View the answer Ich habe das gleiche Problem

Ist dies eine gute Frage?

Bewertung 0
Einen Kommentar hinzufügen

SPAR DIR DAS UPGRADE

Mach dein iPhone so gut wie neu mit unseren Fix Kits.

Jetzt entdecken

SPAR DIR DAS UPGRADE

Mach dein iPhone so gut wie neu mit unseren Fix Kits.

Jetzt entdecken

2 Antworten

Gewählte Lösung

Did you disconnect the battery before you disconnected the digitizer and LCD and didn't reconnect the battery until you connected the LCD and digitizer? You can damage the motherboard if you unhook these parts reconnect them while the battery is connected. You can also check the connections for damage with a magnifying glass and clean the connectors with a qtip and alcohol and a soft brush.

Update (05/24/2020)

You can still check the connections and clean them but first disconnect the battery and don't reconnect the battery before the. lcd and digitizer if that doesn't fix it I would recommend taking it to a repair shop, it will probably need a filter or another part replaced on the motherboard. It has to be done with microsoldering.

War diese Antwort hilfreich?

Bewertung 0

Kommentare:

I didn't disconnect the battery first, i didnt know. Do you think the Ipad can still work? Everything works except for the fact that i cant move anything.

von

Einen Kommentar hinzufügen

Either one or more pins are missing on the digitizer connector on the main board less likely as you’ve already checked or the digitizer has become faulty after re-opening.

Most likely from either a tear in the cable or crushing the digitizer cable between the glass and the housing when closing it again. There is a part of the cable that needs to be folded inwards before closing or the cable will get damaged.

War diese Antwort hilfreich?

Bewertung 0
Einen Kommentar hinzufügen

Antwort hinzufügen

Casey Joe wird auf ewig dankbar sein.
Statistik anzeigen:

Letzten 24 Stunden: 0

Letzten 7 Tage: 0

Letzten 30 Tage: 0

Insgesamt: 18