Repariere deine Sachen Community Store

Das März 2015 Update von Apples 13" MacBook Pro Retina Display, Modell A1502, bietet fifth-generation Intel Core i5 und i7 Prozessoren der 5. Generation und führt den Force Touch Trackpad ein.

1185 Fragen Alle anzeigen

Einstellungen

I was replacing the battery... but I knocked off 1 of 2 silver circles


Block Image

I was replacing the battery, following the ifixit guide...

I was Upto step 9 and

but I knocked off 1 of 2 silver metal circles just above battery connector in the middle.

what do these 2 metal circles do?

should I super glue it back on?

or does this metal component need more attention (like a soldering iron)?

what do I need to do?

Update (05/25/2020)


Block Image

Block Image

Block Image

Thank you for your replies.

so based on the image and information provided…

can I glue this back to the board?

or does this need soldering?

Beantwortet! Antwort anzeigen Ich habe das gleiche Problem

Ist dies eine gute Frage?

Ja Nein
Bewertung 0
2 Kommentare

Let's see what you got post an image of what you knocked off and the place they came from Bilder zu einer vorhandenen Frage hinzufügen

Did you follow this guide: MacBook Pro 13" Retina Display Anfang 2015 Akku austauschen?

von

@o07bond - OK, you broken off the mounting studs. Let's get a pic of yours so we have a better idea how they came off. Focus on the mate surfaces of the studs and the logic board location.

von

Einen Kommentar hinzufügen

2 Antworten

Filtern nach:
Am hilfreichsten Neueste Älteste
Gewählte Lösung

Einstellungen

It looks like basically a nut that you can put a screw into it.

Update (05/25/2020)

It will need to be soldered down to secure it.

War diese Antwort hilfreich?

Ja Nein
Bewertung 1

3 Kommentare:

It's a logic board standoff (stud). It offers a threaded mount point to anchor something, in this case a metal cover.

von

@danj

Thanks the replies Dan - it definitely has threads inside of it :)

I think the metal shield goes over it

In terms of getting it to stick back down...?

Thoughts

von

It will need to be soldered down to secure it.

von

Einen Kommentar hinzufügen

Einstellungen

You will need to get some acetone to clean off the surfaces and then carefully screw in the screw back into the plate and the stud so the plate sits correctly. then carefully screw in the other screw which holds the plate to the second stud. Now ever so carefully lift the edge of the plate just enough (hairline) so you can drip a drop of Cyanoacrylate glue (a.k.a Krazy Glue)

There is no solder used here.

War diese Antwort hilfreich?

Ja Nein
Bewertung 1
Einen Kommentar hinzufügen

Antwort hinzufügen

Josh wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 0

Insgesamt: 68