Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Store

Apples vierte Generation ihrer Smartwatch, mit optionaler Mobilfunkverbindung, veröffentlicht am 21. September 2018.

80 Fragen Alle anzeigen

Replaced screen but still is not turning on

I was working on a cracked apple watch and sadly damaged the LCD while attempting a repair, and had to replace the screen of the device. I replaced the screen with one from an iCloud locked device, but the screen would not turn on. I thought the issue might be the screen itself, so I decided to buy another screen and try that out. That one did not work too. The watch still vibrates when it turns on but the screen stay off. The watch does not make any sounds when trying to play a sound through the find my app.

To add, I tried to replace the battery to no avail and I also tested both screens with another watch and they both worked. The LCD wiring does not look damaged.

Does anyone know what’s going on with this watch and how to fix it?

Beantwortet! View the answer Ich habe das gleiche Problem

Ist dies eine gute Frage?

Bewertung 0
Einen Kommentar hinzufügen

4 Antworten

Gewählte Lösung

Test the battery connector to make sure the correct voltages are running. If they are not, micro solder a new connector from a donor board.

If running the correct voltages, replace LCD cables.

The screen will not turn on or boot loop if something is stuck in the connector on the screen, corrosion, short, or if the pins are bent out of place.

War diese Antwort hilfreich?

Bewertung 0
Einen Kommentar hinzufügen

I found that the LCD cables were damaged. Once they are replaced I will update this

War diese Antwort hilfreich?

Bewertung 0

Kommentare:

Very curious to know if this is possible. It's my understanding that these cables are not repairable. At least probably not easily. I'm guessing they are micro-soldered.

von

Yes, t is, however difficult. Pads can be easily pulled while removing the connector

von

Einen Kommentar hinzufügen

I’m trying to replace the paper tin cables like glue that are behind the lcd cables and I don’t know how you call them or even if I can buy the is for a series 4 Nike edition cellular and gps I rink they ere called ribbons but I’m not sure

War diese Antwort hilfreich?

Bewertung 0

Kommentare:

They are microsoldered on. Parts are on mobilesentrix

von

Einen Kommentar hinzufügen

If anyone can help me I’ll appreciate

War diese Antwort hilfreich?

Bewertung 0
Einen Kommentar hinzufügen

Antwort hinzufügen

Rami Abdi wird auf ewig dankbar sein.
Statistik anzeigen:

Letzten 24 Stunden: 0

Letzten 7 Tage: 3

Letzten 30 Tage: 20

Insgesamt: 120