Repariere deine Sachen Community Store

The Kenmore Elite HE3 is 7.2 cu. ft. capacity electric dryer by Kenmore.

318 Fragen Alle anzeigen

Einstellungen

Only Timed Dry Does Not Heat

The first problem with my appliance was that it stopped heating altogether. On inspection I found that the heating coil had a break in it. After replacing that, everything is back to normal with the lone exception that the “Timed Dry” selection tumbles with no heat. Normal, Jeans, Casual, etc. etc. all dry as normal, but Timed Dry leaves clothes as wet as they went in.

What could be causing just this one option to not get heat?

Diese Frage beantworten Ich habe das gleiche Problem

Ist dies eine gute Frage?

Ja Nein
Bewertung 0
2 Kommentare

Hi @therobinc

What is the model number of the dryer?

von

Hello,

Mod 110-82822 102

Cheers,

Robin

von

Einen Kommentar hinzufügen

1 Antwort

Filtern nach:
Am hilfreichsten Neueste Älteste
Hilfreichste Antwort

Einstellungen

Hi @therobinc

Yes the ifixit iRobot is sometimes too aggressive with long string of numbers. It thinks that it is spam phone numbers or something. I will advise the website’s admin and hopefully they can tweak it a bit more. In the interim I will restore your lost rep. points. ;-)

With regard to the dryer problem, I can only think that it is a control panel problem or perhaps a loose harness connector on the control panel. Was Timed Dry working OK before the heater problem or don’t you know?

Without a schematic it will be hard to isolate if it is not obvious. Here’s a link that may help with that. I don’t know if it has the schematic but usually service manuals do. Given the cost of the control panel - part #4B “Top and Console parts” it may be worthwhile to get it.

Moderator

War diese Antwort hilfreich?

Ja Nein
Bewertung 1

1 Kommentar:

Hello @jayeff ,

Thanks so much for all your help.

Prior to the heating coil break, all settings on the dryer were functioning including the Timed Dry. I’ll take a look at the Service Manual and see if there’s anything obviously wrong with the control panel or harness connectors. At that cost for the Control Panel we can definitely live without the Timed Dry setting (unless it’s a sign for further breakdowns to come).

Cheers,

Robin

von

Einen Kommentar hinzufügen

Antwort hinzufügen

Robin Canfield wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 4

Insgesamt: 338