Repariere deine Sachen Community Store

Hochleistungstablet von Apple herausgekommen am 11. November 2015. Model A1584.

131 Fragen Alle anzeigen

Einstellungen

iPad pro 2nd gen changed screen, worked but not now.

So I changed screen and glass on ipad pro 2nd gen.

I tested the screen, touch and everything worked perfect, I then added “glue” and closed down the ipad, I then headed the ipad up and placed the ipad in press over night.

Which I do to every ipad I repair.

The customer then came in and picked up his ipad, few hours later he called me and the touch does not work what so ever.

What am I doing wrong?

I fixed an ipad pro 3rd gen same time and did the same procedure and touch works perfect on that one.

Beantwortet! Antwort anzeigen Ich habe das gleiche Problem

Ist dies eine gute Frage?

Ja Nein
Bewertung 0
3 Kommentare

Did you use actual glue or adhesive strips?

von

Please elaborate on what you mean by "glue"

von

Adhesive strips and sometimes 3m if the screen did not come with adhesive.

von

Einen Kommentar hinzufügen

2 Antworten

Filtern nach:
Am hilfreichsten Neueste Älteste
Gewählte Lösung

Einstellungen

The only thing I could imagine is that the digitizer was bent after the inspection during the placement/pressing of the screen. Regardless, a new screen should do you just fine. I hope it comes in time before your customer gets too mad!

War diese Antwort hilfreich?

Ja Nein
Bewertung 0

4 Kommentare:

I will need to inspect frame tomorrow then.

von

Definitely worth a shot. I had a customer that brought in an iPad with a bent frame and I had only realized it after installing the new screen. Even the pressure from installing it on the slightly bent frame was enough to permanently damage the digitizer and I had to put on a new one. Good luck!

von

@n0v0 After looking at it closely with new screen, its bent barely noticeable at the bottom right corner.. I avoided touch issues now by being a bit carefull around that corner.

von

@vitoscaletta Glad I could help! Bent frames are a killer!

von

Einen Kommentar hinzufügen

Einstellungen

open it back up and reseat connectors. Also inspect them for damage. Where did you source the screen from?

War diese Antwort hilfreich?

Ja Nein
Bewertung 0

3 Kommentare:

I have done that multiple times, still no response. I have my supplier in hk, which I buy a lot of screens and parts.

von

@vitoscaletta have you tried another screen yet?

von

@hootonberg nope, have to wait for them to arrive, but I bought two just to be safe :P I might drop the press now or heat just to be sure.

von

Einen Kommentar hinzufügen

Antwort hinzufügen

nicolay.94 wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 1

Letzte 30 Tage: 3

Insgesamt: 137